Produto da Freud/Bosch são maravilhosos.

Works well.

Excelente 👌 para las maderas duras que son las que más trabajo

Corta como mantequilla el acero, es muy superior la diferencia de corte al makita qué traen las cortadoras Lc1230, pero después de unos meses me doy cuenta que duro menos que el makita, aun así vale la pena ya que cuesta la mitad de precio

I have purchased this blade 3 times now - for the purpose of cutting 1/8"x1" stainless steel (304). I have tried cutting stainless with other blades and this one is hands down the best I have used.First - you must have a metal cold saw with RPM less than 2000. If you try to run this on a high speed chop saw, it won't work well and you can't make it work.Second - you must recognise that there are phases of the cut and you need to moderate the down pressure to make the blade last. When cutting stainless steel, the starting cut is through the hard surface of the material and once that surface is penetrated, you need to increase the down pressure to make the cut go faster, about 50% or so increase does the trick.Part of the cooling process is to cut fast enough so that the chips carry the heat away. If you go too slow, you will burn up the blade. If you go too slow, you will see more and more sparks and that is bad because it isn't the material sparking, it is the blade.So - how many cuts did I make? On the first blade, I got about 300 cuts before I wore the blade out. I tried other carbide blades that I had to try to finish the remaing 60 cuts - nothing held up. I bought another 2 blades and started on the next 360 cuts. With the modification in cutting technique, the second blade made all 360 cuts and is now cutting nice and cleanly for mild steel - the blade is still going and the cuts are smooth.

buen producto

The Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade is a game-changer for anyone working with ferrous metals, such as steel, iron, and other tough materials. As a DIY enthusiast and metalworker, I recently had the opportunity to use this blade extensively, and I must say that it has exceeded my expectations in every aspect. In this comprehensive review, I will discuss its design, performance, durability, and overall value.**Design and Build Quality:**First and foremost, the design and build quality of the Diablo D1260CF are outstanding. The blade features a 12-inch diameter, making it versatile for a variety of cutting tasks. It's constructed using Cermet II carbide teeth, a high-quality material known for its incredible durability and heat resistance. The blade is also equipped with 60 teeth, which are specifically optimized for cutting through ferrous metals. The teeth are razor-sharp, ensuring precise and clean cuts every time.The design of the blade incorporates laser-cut stabilizer vents, anti-vibration technology, and Perma-SHIELD non-stick coating. These features collectively reduce heat buildup, minimize warping, dampen vibrations, and prevent corrosion, all of which contribute to a longer blade life and superior performance. It's evident that Diablo has invested in thoughtful design to deliver a blade that's both efficient and durable.**Performance:**The performance of the Diablo D1260CF is where it truly shines. Cutting through ferrous metals has always been a challenge, but this blade effortlessly slices through them like a hot knife through butter. I was impressed by the smoothness of the cuts and the lack of sparks or excessive heat generation. It delivers burr-free and virtually no-rework cuts, which is crucial for precision metalworking.One of the standout features is the blade's ability to maintain consistent speed and accuracy even when cutting through thick or dense materials. The carbide teeth stay sharp for a prolonged period, reducing the need for frequent blade changes. This not only saves time but also minimizes the cost of replacing blades frequently.The anti-vibration technology ensures a stable and quiet cutting experience. This is a significant advantage, especially for extended cutting sessions, as it reduces operator fatigue and enhances safety.**Durability:**Durability is a vital factor when considering any cutting tool, and the Diablo D1260CF doesn't disappoint. The Cermet II carbide teeth are exceptionally hard and resilient, and the blade's overall construction makes it highly resistant to wear and tear. Even after extensive use on various ferrous materials, the blade remained sharp and in excellent condition.The Perma-SHIELD non-stick coating not only aids in preventing corrosion but also reduces friction, extending the blade's lifespan. This protective coating also keeps the blade clean, which is a plus for easy maintenance.**Value and Conclusion:**In conclusion, the Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade is a top-tier cutting tool designed for professionals and DIY enthusiasts alike. Its remarkable design, outstanding performance, and exceptional durability make it an indispensable addition to any metalworker's toolkit. While it may be a bit pricier than some alternatives, the long-term cost-effectiveness and the quality of cuts it delivers make it a worthwhile investment.If you frequently work with ferrous metals and demand precision, efficiency, and durability from your saw blade, the Diablo D1260CF is a stellar choice. It has consistently proven its ability to cut through tough materials with ease while maintaining its sharpness and integrity. I highly recommend this saw blade to anyone seeking a reliable and high-performance tool for ferrous metal cutting applications.

El disco se desempeño bastante bien, hice cortes de metal ferroso en PTR de 2" X 2" calibre 14 y cortes en solera de 2" X 1/4 "Cortes limpios !!

Solo lo desempaque para probarlo.Corta bien y vibra mucho menos que el makita que trae mi cortadora.El perfil de los dientes me parece el correcto, los dientes de maquita se despostillan facil.

Super bien, calidad del producto y fecha de entrega,

At nearly 80 dollars cheaper than the makita blade that came with my saw this blade landed at my house before its delivery schedule as well. So needless to say I had to try it rt away. I tried it on 1/8thx2x2 steel angle iron. I was surprised how quiet it was and how smooth it cut as the makita blades i had been buying had 78 teeth i believe. If this blade holds up it will be my go to for this type of chop saw