Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

HUNST F-Theta Campo de lente de escaneo de 300 x 300 mm FL 420 mm para grabadores láser de fibra, lente de escaneo óptico para sistema Galvo de 1064 nm, rosca M85 (300 x 300 mm FL420 mm)

4.3 (22) Escribir comentario
Envío gratis en pedidos superiores a Mex $600.00

Mex $1,907.54

Mex $ 782 .00 Mex $782.00

En stock

1.:45 Mm


2.Color:Rojo


  • Lente de campo de 300 x 300 mm: el ancho y el círculo interior son buenos, y la uniformidad es alta. El rango de escaneo del producto es de aproximadamente 300 x 300 mm, la longitud focal es de aproximadamente 420 mm, y el ángulo máximo de escaneo es de ± 28°.
  • Rendimiento superior: esta potente lente F-theta de Shenzhen Lattice es perfecta para marcar láser fino, grabado, procesamiento de materiales y sistemas de corte, incluso los diseños más complejos se pueden completar perfectamente.
  • Material de cuarzo de alta calidad: tiene las características de resistencia al desgaste y resistencia a altas temperaturas, puede soportar láser de alta potencia, tiene una mejor estabilidad térmica y reduce el cambio de enfoque térmico.
  • 【Piezas láser de fibra】: esta lente para láser de longitud de onda de 1064 nm proporciona hasta un 97% de transmisión con muy poca distorsión, el revestimiento antirreflectante garantiza un excelente grabado y una larga vida útil.
  • Fácil de instalar: la rosca estándar M85 x 1 garantiza una fácil instalación, que puede reemplazar o actualizar rápidamente la lente antigua en la mayoría de máquinas de marcado láser del mercado. Nota: Por favor, ajusta la longitud focal al cambiar el tamaño de la lente.


Descripción del producto

1064

Las lentes de escaneo F-Theta juegan un papel importante en muchas de las aplicaciones láser de vanguardia de hoy en día. Sistemas láser para marcado, grabado, perforación y mucho más. La máquina de marcado láser cambia el tamaño y la intensidad de la luz del formato de trabajo a través de diferentes lentes.

¿Cómo elijo una lente? (Área de trabajo)

1. La misma lente, cuanto mayor sea el aumento, más profundo será el grabado

2. La misma ampliación, la lente más pequeña, más profundo es el grabado

3. Las ventajas de una lente grande son la zona de grabado es grande, pero la desventaja es que la luz es débil.

4. La ventaja de la lente pequeña es que puede grabar una profundidad más profunda, pero la desventaja es que el área de grabado es pequeña.

1064

Especificaciones:

1064

Foto

1064

Fernando Luna
Comentado en los Estados Unidos el 22 de febrero de 2025
Build quality is great! Have been using it for years and it's held up perfectly. Exceptional cost for performance. Very good anodizing too
Connor
Comentado en los Estados Unidos el 9 de enero de 2025
There is nothing to dislike about it, guessing that you aren't using it for a bike that costs thousands, this is a safe and good product.
Kasey
Comentado en los Estados Unidos el 16 de enero de 2025
When I ordered this lens it say F160 110x110, which was as expected. When I received it I noticed the box and lens were marked as F163. I now see that the listing title shows F163. I set my laser up with configs I had for F160 110x110 and everything seems to be working just fine. I'm too knew to fiber to know if I should care about the 3mm difference but without question the lens is working just fine.
Kasey
Comentado en los Estados Unidos el 16 de enero de 2025
When I ordered this lens it say F160 110x110, which was as expected. When I received it I noticed the box and lens were marked as F163. I now see that the listing title shows F163. I set my laser up with configs I had for F160 110x110 and everything seems to be working just fine. I'm too knew to fiber to know if I should care about the 3mm difference but without question the lens is working just fine.
Kasey
Comentado en los Estados Unidos el 16 de enero de 2025
When I ordered this lens it say F160 110x110, which was as expected. When I received it I noticed the box and lens were marked as F163. I now see that the listing title shows F163. I set my laser up with configs I had for F160 110x110 and everything seems to be working just fine. I'm too knew to fiber to know if I should care about the 3mm difference but without question the lens is working just fine.
Kasey
Comentado en los Estados Unidos el 16 de enero de 2025
When I ordered this lens it say F160 110x110, which was as expected. When I received it I noticed the box and lens were marked as F163. I now see that the listing title shows F163. I set my laser up with configs I had for F160 110x110 and everything seems to be working just fine. I'm too knew to fiber to know if I should care about the 3mm difference but without question the lens is working just fine.
Kasey
Comentado en los Estados Unidos el 16 de enero de 2025
When I ordered this lens it say F160 110x110, which was as expected. When I received it I noticed the box and lens were marked as F163. I now see that the listing title shows F163. I set my laser up with configs I had for F160 110x110 and everything seems to be working just fine. I'm too knew to fiber to know if I should care about the 3mm difference but without question the lens is working just fine.
Kasey
Comentado en los Estados Unidos el 16 de enero de 2025
When I ordered this lens it say F160 110x110, which was as expected. When I received it I noticed the box and lens were marked as F163. I now see that the listing title shows F163. I set my laser up with configs I had for F160 110x110 and everything seems to be working just fine. I'm too knew to fiber to know if I should care about the 3mm difference but without question the lens is working just fine.
Kasey
Comentado en los Estados Unidos el 16 de enero de 2025
When I ordered this lens it say F160 110x110, which was as expected. When I received it I noticed the box and lens were marked as F163. I now see that the listing title shows F163. I set my laser up with configs I had for F160 110x110 and everything seems to be working just fine. I'm too knew to fiber to know if I should care about the 3mm difference but without question the lens is working just fine.
Kasey
Comentado en los Estados Unidos el 16 de enero de 2025
When I ordered this lens it say F160 110x110, which was as expected. When I received it I noticed the box and lens were marked as F163. I now see that the listing title shows F163. I set my laser up with configs I had for F160 110x110 and everything seems to be working just fine. I'm too knew to fiber to know if I should care about the 3mm difference but without question the lens is working just fine.
Benjamin
Comentado en los Estados Unidos el 21 de abril de 2025
Strong
Matt Dessecker
Comentado en los Estados Unidos el 2 de agosto de 2024
I knocked a star off because the stem is different than what the seller shows. The front is made different and shows the brand name of Hassns, not Wake. But besides that, the stem fit the forks and handlebars perfectly. The stock stem on my Schwinn Al Comp is around 80mm, so this 35mm stem really brought the bars closer to the head tube. This is a lot more comfortable for me when riding because I had shoulder surgery and with the bars closer to the head tube, it help me sit just a little more upright and takes the pressure off my shoulder. The stem looks great, fit great, and hopefully lasts a long time. I raced BMX back around 1979-80, so I just had to get some parts to upgrade/mod my Al Comp. Putting the new parts on my bike took me straight back to being a 13-14 year old kid with my friends tearing our bikes apart to upgrade them.
Customer
Comentado en los Estados Unidos el 16 de noviembre de 2024
So far good looks good
Edward A Audet
Comentado en los Estados Unidos el 2 de agosto de 2023
As expected.
Edward A Audet
Comentado en los Estados Unidos el 2 de agosto de 2023
As expected.
Edward A Audet
Comentado en los Estados Unidos el 2 de agosto de 2023
As expected.
Edward A Audet
Comentado en los Estados Unidos el 2 de agosto de 2023
As expected.
Edward A Audet
Comentado en los Estados Unidos el 2 de agosto de 2023
As expected.
Edward A Audet
Comentado en los Estados Unidos el 2 de agosto de 2023
As expected.
Edward A Audet
Comentado en los Estados Unidos el 2 de agosto de 2023
As expected.
Edward A Audet
Comentado en los Estados Unidos el 2 de agosto de 2023
As expected.
Carl Shop
Comentado en México el 12 de abril de 2023
No era lo que pedí y no recomiendo este producto calidad mediocre muy indeleble no tires tu dinero hay mejores opciones y a menor precio
Productos recomendados
Tocadiscos Synchronous Synchron Motor 50/60Hz AC 100~127V CCW/CW 4W (10-12RPM)

Mex $202.00

Mex $ 107 .00 Mex $107.00

4.4
Elegir
Conjunto de Motor Generador Termoeléctrico Resistencia a Altas Temperaturas 200 ℃ Piezas de Repuesto Universales para Motor de Ventilador de Chimenea

Mex $247.95

Mex $ 131 .00 Mex $131.00

4.3
Elegir
Motor de Ventilador de Aire Acondicionado, Reemplazo del Conjunto del Motor de Ventilador de Calentador HVAC 27226-EA010 27225-8H310 Apto para X Trail Maxima Navara

Mex $437.00

Mex $ 227 .00 Mex $227.00

4.4
Elegir
MIMIRACLE 3015924900 - Motor de repuesto para ventilador de refrigerador, compatible con Kenmore D4612AAA36

Mex $475.42

Mex $ 261 .00 Mex $261.00

4.9
Elegir
NURII Motor de Aire Acondicionado de 60 HZ, FN35B-PG, Motor de CA de 6 Cables YYR30-4A5-PG

Mex $2,047.26

Mex $ 962 .00 Mex $962.00

4.5
Elegir
97012248 Reemplazo del motor de ventilador de campana de rango compatible con Broan y Nutone reemplaza BP17 99080492 S97012248 ER97012248 99080363 AP4527731 1172615 97005161 9081 33 99080410

Mex $514.44

Mex $ 236 .00 Mex $236.00

4.6
Elegir
4681JB1029A - Motor de repuesto para ventilador de refrigerador LG, Kenmore, motor de ventilador de refrigerador mini sustituye a EAU60694507 4681JB1017A 4681JB1010C AP4438221 DC 13V 3.2W

Mex $499.68

Mex $ 234 .00 Mex $234.00

4.6
Elegir
5304521244 Motor de ventilador evaporador compatible con Frigidaire WhiteWestinghouse Electrolux refrigerador, parte de repuesto del motor del ventilador del congelador 4960980 AP6888327 PS12724118

Mex $647.01

Mex $ 317 .00 Mex $317.00

4.3
Elegir