I am impressed by the quality and finish here. Handsome and solid, quiet and wobble free. Installation was as expected; I've installed several ceiling fans over the years. No issues.If you like what you see in the listing, style, size, etc., you will not be disappointed.

The fan is modern, sleek and light weight. The dimmable lights with three temperature settings are nice; additional touch is the night light which shines towards the ceiling. The blades provide great air circulation in a quiet manner. Installation was straight forward; approximately 30 minutes. Only gripe is the remote size; it could be smaller. However, it does its duty. Very pleased with this product which led me to install another in a secondary bedroom.

This is a very nice fan and at a very good price. We have been looking at fns at the bigs stores like Lowes and HD and this fan was just as nice and half the money they wanted. It was easy to install and it moves alot of air. It is in my living room and we have a woodstove going in the winter so you need to get the air moving so you dont bake. This fan is 52" and is reversible and has a remote control. The other thing that I like is that its quiet. My previous fan was kinda noisy. It does have a dome light on it as well but I have a ton of lghts in that room anyway so I rarely use. Overall very pleased!

I’m only giving it a three star rating because it’s cool but the installation was terrible and the instructions were unclear. After some sketchy work I managed to get it to hang without rubbing.

I love this fan, but lets get the bad out of the way first. The instruction manual has a bad error in it, it shows a picture mounting the fan blades on the bracket one way, with the screws going through the wood grain side, then another picture shows them going through the black side. The only other complaint I have is it was missing some assembly equipment. There are 4 screws that hold the fan to the mounting bracket, 2 are already on the bracket. These screws are the same as the ones used to attach the fan blade to the brackets, so after using all of them, I was one screw short. Luckily this fan is replacing an existing one and the old screws fit. Next, there were no mounting screws for the wall mount remote holder. I had some at home and used them, but you need the right size screws with a tapered back. The screws must not protrude into the pocket where the remote sits or the remote will not fit in the holder.Now the good news. The fan went together very quickly (after I noticed the mistake in the instructions. The fan controller has 3 connections that connect to the fan itself, and all of them are color coded, I made sure to match up the wire colors, but I think they were all different sizes to prevent connection errors. The light Plugged into the bottom of the fan and just slides in, no tools necessary for that. The mounting bracket has 4 rubber pads that rub against the ceiling, I'm assuming to absorb vibration. The 2 mounting holes lined up perfectly with my installed junction box. The 2 screws are a good length to accommodate different drywall thickness, and how high up the box is mounted. I believe the screws are about 2 inches long. The other thing I love is a hook on the bottom of the mounting bracket, you can put the hook through one of the mounting holes on the fan to hold it up while making the electrical connections. I believe this feature is a must for people who want to install the fan by themselves. Once the connections are made, just take the fan off the hook and put it over the mounting bracket and twist to hold it temporarily. Then put the last two screws in and tighten them. The last 2 screws may require you to slightly wobble the fan so the holes line up, once both screws are in, tighten all 4 and you are done.I love that this fan does not have a hanging ball like a lot of fans do, After some time, this ball allows the fan to vibrate and makes an annoying noise you can never really get rid of. The rubber pads on the mounting bracket will absorb vibration silently. Also, since the motor is not hanging from a ball, there is nothing to clean on top of the motor. The only thing that will need cleaning is the blades.The remote needs 2 AAA batteries. It has every function you can think of. There are 6 speed settings and options to adjust the light, there are no color change options. There is also a switch on the side of the remote for voice activation, but I could not figure out which commands to use and really didn't bother trying it. There was an annoying ring of light at the top of the fan, well, annoying until I figured out what it was, a night light. There is a button on the remote to turn it on and off, and when the room is dark it is actually the perfect brightness for a night light. Also since it at the top of the light, it is not direct light that should not bother anyone.I really like this fan, and will probably buy another one or two for other rooms. I'm just not sure how that would work with the remote and if that is even possible. Clarification from the manufacturer would be helpful with this. If the few problems I had were corrected I would not hesitate giving the fan a 5 star rating.