No hay artículos en el carro
No hay artículos en el carro ★ 370 piezas de 4 valores M2 M3 M4 M5 rosca hembra tuercas moleteadas de latón tuercas de inserción roscadas. ★
♥ ♥ ¿Por qué elegirnos? ♥ ♥
✔ 1. Hecho de latón duradero, tiene una excelente resistencia a la corrosión y resistencia a la oxidación, lo que puede garantizar un uso a largo plazo.
✔ 2. Cumple con el sistema métrico estandarizado. El error promedio es inferior a 0,01 mm. Los hilos son muy afilados, limpios, precisos y sin rebabas. El tamaño preciso hace que tu instalación o mantenimiento sea más fácil.
✔ 3. Ampliamente utilizado en funda de plástico para computadora portátil, funda de plástico para computadora de computadora, funda de plástico GPS, funda de plástico para teléfono celular, caja de plástico para instalaciones de comunicación ilimitadas, caja de plástico para electrodomésticos, automóviles, electrodomésticos, médicos, electrónicos y otras fundas de plástico.
Especificaciones del producto:
Color: latón.
● Tipo: M2 M3 M4 M5.
● Diámetro interior: 4 mm, 6 mm, 8 mm y 10 mm.
● Diámetro exterior: 3,5 mm, 5 mm, 6 mm y 7 mm.
Cantidad de embalaje: 370 unidades.
● Material: latón duradero de alta calidad.
● Nombre del producto: kit de surtido de tuercas roscadas de latón
▲ El paquete incluye:
● M2 x 4 mm x 3,5 mm ----------- 40 unidades.
● M2 x 6 mm x 3,5 mm ----------- 40 unidades.
● M2 x 8 mm x 3,5 mm ----------- 40 unidades.
● M2 x 10 mm x 3,5 mm ----------- 40 unidades.
● M3 x 4 mm x 5 mm ----------- 30 unidades.
● M3 x 6 mm x 5 mm ----------- 30 unidades.
● M3 x 8 mm x 5 mm ----------- 25 unidades.
M3 x 10 mm x 5 mm ----------- 25 unidades.
● M4 x 4 mm x 6 mm ----------- 20 unidades.
● M4 x 6 mm x 6 mm ----------- 20 unidades.
● M4 x 8 mm x 6 mm ----------- 15 unidades.
● M4 x 10 mm x 6 mm ----------- 15 unidades.
● M5 x 6 mm x 7 mm ----------- 10 unidades.
● M5 x 8 mm x 7 mm ----------- 10 unidades.
● M5 x 10 mm x 7 mm ----------- 10 unidades.
▲ Notas:
✿ Piezas pequeñas. No apto para niños menores de 3 años.
S
Comentado en el Reino Unido el 13 de mayo de 2024
Chances are if your DIY part fails under load, it won't be at the brass inserts. Just get these
Paul Carne
Comentado en el Reino Unido el 7 de marzo de 2024
I use these inserts quite a bit, I am a prolific 3d printer nerd! If I need something and it can be 3d printed then I will 3d print it. Not only does this save me money but also gives me a warm fuzzy feeling that I haven't had to go out and spend my hard earned money on something I could have made.These inserts are awesome because they now give me the ability to insert proper sized threads into my 3d prints instead of drilling and tapping the plastic and hoping is wasn't going to strip out.What I like so much about them is that once they are heated up with tip the soldering iron, I can push them into place and the plastic printed part melts around them and then hardens, securely holding them in place by the ridges and BINGO, I have a perfect thread exactly the right size and exactly in the right place.These threaded inserts are also a very competitive price and you get a whole load of them of many different sizes.If you have need of something like this, buy them, you wont regret it, they are very good quality.
MT Pockets
Comentado en los Estados Unidos el 25 de junio de 2021
I was hesitant to get these because I was looking for ones that had more holding edges. I didn’t know if these would hold that well, but they had 3 of the sizes I needed immediately so I gave them a shot. They hold well. And yes I was pleasantly surprised. I actually created two pieces that if these twisted or came out I wouldn’t waste the parts I’d already printed.I’ll keep using these unless they start slipping, though it appears the PLA+ I’ve been using melted around them quite well.
Susan Hansen
Comentado en los Estados Unidos el 21 de febrero de 2020
Somewhat necessary if you want to make an assembly out of 3D printed parts. They do exactly what they should and hold well. The trick is learning how to push them into your part. Using a soldering iron tip to heat it up and position it and then pressing it in with a flat surface that will go flush with the part is the best way I've found.
Productos recomendados
Mex $233.32
Mex $ 139 .00 Mex $139.00
Mex $800.02
Mex $ 416 .00 Mex $416.00
Mex $133.60
Mex $ 77 .00 Mex $77.00
Mex $69.99
Mex $ 34 .00 Mex $34.00