No hay artículos en el carro
No hay artículos en el carro El transmisor FLYSKY FS-i6 2.4G AFHDS2A tiene señal estable, larga distancia de control remoto y múltiples funciones, que es popular entre los usuarios. Es compatible con receptores de la serie AFHDS2A.
El transmisor y el receptor estaban prefijados antes de la entrega. Si está utilizando un transmisor o receptor diferente, siga los pasos a continuación para conectarse al puerto B/VCC del receptor.
1. Conecta el cable de unión incluido al puerto B/VCC del receptor.
2. Conecta la fuente de alimentación CC 4V-6.5V a otros puertos, los polos positivos y negativos no se pueden conectar erróneamente.
3. Sigue presionando la tecla BIND y luego enciende el transmisor para entrar en el modo de encuadernación.
4. El transmisor mostrará el voltaje RX, lo que significa que la unión es exitosa.
5. Retira el cable de encuadernación, comprueba el funcionamiento de los servos. Si algo no funciona como se esperaba, inicia este proceso desde el principio.
Especificaciones FS-i6:
*Empujar el acelerador izquierdo hacia arriba y hacia abajo no vuelve automáticamente al centro.
Canales: 6 CH
Tipo de modelo: multirotor/ala fija/heli.
[Los parámetros se pueden configurar para admitir cuadricópteros, aunque no hay icono de cuadricóptero en el menú TX.]
Rango de RF: 2,40-2,48 GHz.
Ancho de la marca: 500 KHz.
Potencia RF: menos de 20 dBm.
Sistema de 2,4 GHz: AFHDS 2A y AFHDS.
Tipo de código: GFSK
Sensibilidad: 1024
Advertencia de bajo voltaje: menos de 4,2 V.
Conector DSC: PS2; Salida: PPM
Puerto de carga: no.
Peso del transmisor: 392 g 14 oz
Tamaño del transmisor: 174 x 89 x 190 mm, 6.8 x 3.5 x 7.5 pulgadas.
Tamaño del paquete: 212 x 106 x 235 mm, 8.3 x 4.2 x 9.3 pulgadas.
Peso del paquete: 676 g 1.5 libras
Potencia: 6 V, 4 pilas AA (no incluidas).
Modo de visualización: STN tipo positivo transflectivo, 128 x 64 matriz de puntos VA73 x 39mm, luz de fondo blanca.
Certificación: CE, FCC
Memorias del modelo: 20
Rango de control: 500 m. Depende del entorno de uso, el clima y otros factores.
Especificaciones FS-iA6B:
Canales: 6 canales
Rango RF: 2,408 - 2,475 GHz
Banda: 135.
Potencia RF: ≤20dBm.
Sensibilidad RX: -105dBm
Sistema 2.4G: AFHDS 2A
Tipo de código: GFSK
Longitud Antenna: 26 mm x 2 (antena dual)
Entrada de energía: 4.0-6.5V DC
Dimensiones: 43 x 26 x 15 mm, 4,3 x 2,6 x 1,5 cm.
Peso: 16 g 15,9 g.
Interfaz i-camión: Sí
Tipo de modelo: Muotor/ala fija.
Transmisores compatibles: Compat con FS-i6, FS-I6X, FS-IFS-i4
Contenido del paquete:
1 transmisor FS-i6.
1 receptor FS-iA6B.
1 cable de encuadernación.
Manual 【EN & CN】 * 1
Entrega sin pilas
Compatible con PWM/PPM/i.camión,
Cómo activar PPM:
Mantenga pulsado el botón "OK" en el lado derecho de la visualización durante 2 segundos para entrar en el menú del mando a distancia-System-RX Setup-PPM Ostput para encenderlo o apagarlo.
Mantén pulsada la tecla "CANCELAR" en el lado derecho de la visualización durante 2 segundos para guardarla.
Luego, la posición del receptor FS-IA6B CH1 emite PPM.
dwellsy
Comentado en Canadá el 9 de junio de 2024
I am comparing this directly to the 5 channel Turnigy brand kit that I got a few years ago for my 3D printed RC Boat Build. Unfortunately I did a stupid and had wrong voltage to the receiver and melted it after a few minutes of celebratory testing.. Thankfully this kit far exceeds what I ever need, but good to know I have extra channels to do other fun things with including controlling Arduino actions… the Sky’s the limit. (Some kind of pun intended)There is some info provided in the book (not much), but there is more online, and setup is pretty straight forward. Binding instructions are included and fairly clear. You need some knowledge on how these things work, or at least it is helpful to get started. There are a ton of toggles and switches and buttons and dials.. it seems overwhelming at first, but if you get setup and get a servo moving on 1 channel the rest is cake. The first testing in a real scenario will be my boat project. Although I don’t need all the channels, perhaps I can put some lights on it now and control them. This kit supports all sorts of aviation R/C’s.The Transmitter is a beauty. It feels great in the hands. Speaking of, it’s a mode 2 controller which means rudder/throttle is on the left. I didn’t see that you can change that on this controller (The Turnigy Tx’er has a toggle for modes 1,2). Mode 2 is intended more for flight of planes or copters. 1 stick is usually spring loaded, and they both feel great. In fact all dials, toggles, buttons etc. all feel good with affirmative clicking/snapping where required. The dials are smooth as well. The trim buttons have center beeps, but not the dials.I really like the readouts the nice display offers. Live battery voltage as well as other telemetry information can be seen easily. The trim buttons have center beeps, but not the dials. Everything is easy to navigate and program from the menu in the Tx’er. There is no doubt with the quality, and available power that this thing would easily exceed 2km on some fresh batteries. Nothing really feels cheap here. All good quality. There is also a DSC (Direct Servo Control) / Trainer port on the transmitter which could be handy at a large event for example. That said with the superior automatic frequency hopping, it’s not likely needed. Nice attention to details (little things including Power-On Throttle warnings) and a nice lanyard anchor point. I am rather impressed with this kit. Great value with loads of tech for a great price. Solid 5 stars!
Lee
Comentado en Canadá el 27 de mayo de 2024
Have it as a back works good feels small in hands ,
JJ
Comentado en los Estados Unidos el 9 de abril de 2024
Nice controller and very easy to setup as well as switch PPM on/off. My only gripe is that you can only use 2 of the aux switches as it’s only 6 channels. Having buttons like the tx16s would be nice for mode selection as well.
RadRafael
Comentado en los Estados Unidos el 13 de mayo de 2023
It's hard to get over what a fantastic deal this controller is for your entry and moderate users. It has a lot of channels and adjustments to get the job done. Everything feels good and fluid in our hands. FlySky is an OEM brand for many respected RC companies such as RedCat and others so you know it's a name you can trust for both performance and quality.
Bryan Newman
Comentado en los Estados Unidos el 11 de abril de 2023
We got this for our first attempt at RC planes from scratch and I have to say these controls worked great right out of the box. We quickly had the servos and thrust controls working and they seemed to work well on the ground. I do wish there were somewhat better instructions in the box for where to place each in the receiver, but we were able to find that information on the web easily enough.The box does feel a little plasticky, but is great for the price and great as an intro controller while getting the hang of flying. All in all we were very happy with it.
Productos recomendados
Mex $299.00
Mex $ 143 .00 Mex $143.00
Mex $599.99
Mex $ 269 .00 Mex $269.00
Mex $2,800.96
Mex $ 1,372 .00 Mex $1,372.00
Mex $264.00
Mex $ 137 .00 Mex $137.00
Mex $1,118.95
Mex $ 615 .00 Mex $615.00
Mex $5,554.68
Mex $ 1,881 .00 Mex $1,881.00
Mex $212.00
Mex $ 127 .00 Mex $127.00
Mex $196.97
Mex $ 116 .00 Mex $116.00