Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Calentador de agua eléctrico de 2.5 galones debajo del fregadero, calentador de agua caliente instantáneo, 110 V, 120 V, 1500 W, calefactores de almacenamiento compactos montados en la

Envío gratis en pedidos superiores a Mex $600.00

Mex $3,418.18

Mex $ 1,572 .00 Mex $1,572.00

En stock

1.Color:Blanco


Acerca de este artículo

  • Fácil de instalar y de uso amplio: el mini calentador de agua Fisoceny es adecuado para conexión de manguera de agua NPT de 1/2 pulgadas, conexión enchufable con cable de alimentación de 3 pies para fuente de alimentación de 110 V/120 V incluida, y se puede instalar fácilmente. Calentadores de agua de tanque pequeño de 2.5 galones con diseño compacto de 11.4 pulgadas de largo x 11.4 pulgadas de alto x 1.4 pulgadas de ancho, ahorra más más más espaciespaciespaciespaciespacidebajo del fregadero, estantes, pared o montaje en el piso (soporte incluido). Se puede utilizar ampliamente en cocinas, oficinas, caravanas y peluquerías, etc.
  • 【No más esperas por agua caliente】El pequeño calentador de agua eléctrico con tasa de recuperación rápida puede quitar largas esperas para aguas calientes. El tanque de acero inoxidable duradero y excelentes materiales de revestimiento de aislamiento reducen en gran medida la pérdida de calor y proporcionan agua caliente a temperatura constante en el punto de uso.
  • Duradero y de larga duración: los materiales internos del calentador de agua caliente instantáneo eléctrico de 110 V están hechos de capa calcinada de alta temperatura y capa de esmalte, que tienen resistencia a la corrosión, prevención de óxido y propiedades anticorrosión. Los tubos de calefacción de acero inoxidable y las varillas de magnesio integradas pueden purificar eficazmente la calidad del agua y prolongar la vida útil. El cuerpo del tanque integrado y la capa de relleno sin CFC de poliuretano garantizan la estabilidad del cuerpo y un excelente aislamiento.
  • 【Eficiencia energética y fácil de usar】El mini calentador de agua eléctrico FISOCENY tiene un excelente nivel de eficiencia energética. Nuestros calentadores de agua con eficiencia térmica de hasta un 90%, mayor eficiencia energética, proporcionan agua caliente inmediata en el punto de uso cuando lo necesites, calentamiento rápido de 6 minutos, el agua caliente instantánea siempre está a la demanda. Ahorra energía y tus facturas. El diseño mecánico de interruptor de perilla soporta ajuste de temperatura de 90 °F a 150 °F. Es simple y práctico.
  • Excelente calidad y garantía: los calentadores de agua para tanque de almacenamiento tienen muchos diseños de seguridad, tanque de acero inoxidable duro, diseño a prueba de fugas, material de aislamiento, evita sobrecalentamiento, válvula de alivio de presión, vida útil más larga, todo para tu seguridad, el soporte de 7 x 24 horas siempre está a tu servicio. Si tienes algún problema, no dudes en ponerte en contacto con nosotros.


  • Nombre de la marca: FISOCENY.
  • Nombre del producto: Fisoceny mini calentador de agua de 2.5 galones debajo del fregadero
  • Voltaje: 110-120 V.
  • Potencia: 1500 W.
  • Color: blanco.
  • Tamaño del producto: 11.4 pulgadas de alto x 11.4 pulgadas de largo x 10.4 pulgadas de ancho x alto
  • Características: temperatura ajustable, fácil de instalar, protección contra sobrecalentamiento, liberación de alta presión, bloqueo de temperatura.
  • Uso: cocina, peluquería, caravana, camión, oficina, restaurante, etc.
  • Temporada: todas las estaciones.
  • Tipo de montaje: montado en la pared o estante o montado en el piso.
  • Método de salida de agua: salida
  • Aplicación: lavar la cara, cepillar los dientes, lavar verduras, etc.
  • Rango de calentamiento: 70-140 °F (30 ℃-65 ℃).
  • Método de control: perilla mecánica.
  • El paquete incluye: 1 calentador de agua debajo del fregadero, 1 válvula de liberación de presión, 1 soporte de instalación, 2 tornillos, 2 tubos de agua hembra a tubos de agua hembra.
  • Consejos:
  • 1. Llena el agua antes de la primera energía en uso, de lo contrario causará un fallo de protección a altas temperaturas.
  • 2. La pared de montaje debe ser una pared de carga. Si no, refuerza la pared o instala perchas o soportes de carga, de lo contrario puede causar que la máquina se colapse y funcione mal.
  • 3. Se deben reservar al menos 5 pulgadas de espacio para la instalación para facilitar la construcción y el posterior mantenimiento.
  • 4. Está prohibido utilizar cables de conexión comunes para conectar el calentador de agua para evitar accidentes de seguridad causados por el sobrecalentamiento del circuito.
  • 5. Está prohibido invertir, inclinar o colocar la máquina en plano para evitar daños.
  • 6. Asegúrate de que el agua del llave tenga una presión de agua de al menos 0,1 MPA, con grifos fríos y calientes.

Dave & Lorna T
Comentado en los Estados Unidos el 26 de febrero de 2025
It gives you about 2 1/2 gallons before starting to get cold. Fortunately for under my kitchen sink when connected to the hot water line it allows just enough hot water to compensate for the cold that typically comes out before hot water from the household hot water heater gets to the sink. For me it works for what I need it and the price was right and I already had a 110v outlet under the sink. I would only use this for the same purpose. I would not purchase it for any other purpose.
Jay J.
Comentado en los Estados Unidos el 12 de febrero de 2025
I’ll preface this review by stating this heater is only being used for a single sink and a bidet in a warehouse.With that being said, I’m quite happy with my purchase. It was easy to install, the water can actually get very hot even if set only about 50-60% of the way and I haven’t had any leaking issues. I’m no plumber but I know to always use pluming tape when installing plumbing accessories.The item does require a decent amount of space. It is a two gal tank after all but other than that I have no issues; and it does fit under the bathroom sink pretty comfortably.The unit is used during the day time only and is shut off at the end of the work day. I’ve had it for a few weeks now and that seems to work really well.It also only takes about 10-15 mins to get to temp when set at 50%. It may heat quicker if set to max.
Chas
Comentado en los Estados Unidos el 1 de febrero de 2025
Easy install. Worked perfect. No need to set on max setting. Extremely hot water at maybe 3/4 setting. I use this at my furthest fixture....Kitchen sink from tankless water heater. Don't have a dishwasher.....no need, I have a Tiny House. Yet, if I desire more hot water than this unit provides my tankless kicks in. New in use, I'll convey in one year if its still doing well.Again, easy install and works great.
Private
Comentado en los Estados Unidos el 25 de enero de 2025
Worked great for about 5 weeks. We did have to purchase different hoses, since the ones provided did not fit our connections; which are standard. Now it barely warms water and only for about 30 seconds worth.I DO NOT recommend this mini water heater.
Ross
Comentado en los Estados Unidos el 13 de agosto de 2024
We had a problem in our new home, where the tankless water heater was quite a ways from the kitchen. It took 90 seconds or more to get hot water, which seems like a lifetime. We decided to get a hot water heater that we could put under the sink. Some models require 220 V which we didn’t want. This model only requires a normal 110. The purpose of this hot water heater will be to get instant hot water. We can then wash hands or rinse dishes, which only uses a small amount of hot water. If we are filling the entire sink, then the hot water in this tank would be exhausted and the water coming from our whole house tankless water heater will fill the rest of the sink.After installation, we are super happy. And we don’t see any decrease in water, pressure or water flow. The water is hot in about four seconds. This is a perfect solution to a problem that we had.A few comments on installation so you know you can do it. They do not include any white Teflon tape for sealing the joints. You need to purchase this from Amazon or your local hardware store. Instructions they provide are not really good. But there’s not that much to actually do so it’s OK. If you don’t know how to wrap Teflon tape, then I suggest going to YouTube and finding out how to do it. The installation is simple wrap tape on the top of the two water ports. install the safety valve on the cold water inlet pipe on the top of the tank. Put white tape on the top threads. Next under sink turn the hot water off and disconnect the faucet pipe that is going to the shut off valve. Connect the new pipe they gave you to the shut off valve and then to the cold port on the tank. Now comes the tricky part. The line coming from my faucet that should connect to the tank did not have the same size end and therefore I needed to go to the hardware store to pick up a connector. The guy there helped me get the right one. I applied white tape to the connector and then connected everything. At this point, I tested and found a leak. I need to apply more white tape in order to get the leak to stop.In summary, great product, solved my problem, and I’m happy
Mizuel
Comentado en México el 7 de febrero de 2024
Una vez que surte el agua que tiene en el tanque (esta si está caliente) el resto sale fría. Lo instale en cocina. No dura el agua caliente ni dos minutos.
Productos recomendados

Mex $5,341.00

Mex $ 1,881 .00 Mex $1,881.00

4.6
Elegir

Mex $3,012.07

Mex $ 1,355 .00 Mex $1,355.00

5.0
Elegir

Mex $11,175.00

Mex $ 1,881 .00 Mex $1,881.00

4.9
Elegir

Mex $6,499.00

Mex $ 1,881 .00 Mex $1,881.00

4.5
Elegir

Mex $14,602.84

Mex $ 1,881 .00 Mex $1,881.00

4.6
Elegir