No hay artículos en el carro
No hay artículos en el carro Placa de circuito de protección de carga para reemplazo de baterías Milwaukee M18 Li-ion rotas.
(Batería no incluida)
Compatible con la mayoría de las baterías Milwaukee de 18 V y los cargadores Milwaukee M18. Verifique su número de modelo y los siguientes modelos compatibles;
Modelos de baterías compatibles;
- 48-11-1815
- 48-11-1820
- 48-11-1822
- 48-11-1828
- 48-11-1840
- 48-11-1841
- 48-11-1850
- 48-11-1852
- 48-11-1860
- 48-11-1865
- 48-11-1890
Sherman
Comentado en Canadá el 17 de marzo de 2025
The product is exactly as described and worked excellent when swapped out with the original Milwaukee battery circuit board. Recommend using a portable Kweld brand spot welder to reattach the metal terminals. Soldering does work but not as tidy as the spot welder.I found the battery test button is a touch lower than the one on the factory Milwaukee circuit board. So, when reassembled, the battery test button doesn't reach the battery test button. Swap out the buttons is what I did from Milwaukee battery board to this imitation board.
Shane
Comentado en Australia el 17 de enero de 2025
It wasn't the issue in the end
Battery Guy
Comentado en los Estados Unidos el 22 de julio de 2024
LEDs not very bright.
Judy Semple
Comentado en Canadá el 23 de diciembre de 2024
Depending on the battery, this board can go from easy to a time consuming replacement. Recommend taking your existing battery top off first and having a look.If the battery has the nickel conductors all visible, this will be relatively easy.If the battery has the nickel conductors below the plastic housing, you have to carefully cut away the plastic to get this board to fit (not using metal tools our risk shorting the cells) or in this case, the better option would be to buy the replacement case with new board and transfer the batteries from your case to a new one.The board seems to be decent quality itself.
Ronald Dolfay
Comentado en los Estados Unidos el 20 de abril de 2024
Milwaukee makes great tools and batteries. Problem is, if the battery pack drops below the minimum voltage the BMS board is preprogrammed to lock the pack out from charging or discharging. Even when the cells are very new and the pack has been discharged and can be brought back to a usable level the BMS will not allow the pack to be used. These replacement boards resolve this issue and are fairly easy to install. TTI, the company that makes Milwaukee, RYOBI and Rigid does this on all their batteries. I believe that this is just their way of making sure they stay in the battery business. These boards are very well designed and function well with Milwaukee tools and chargers. They're a fantastic way to revive your batteries and save a great deal of money. Well worth the price!
Productos recomendados
![[Paquete de 2] 3.6Ah Reemplazo para batería Dewalt 12V Ni-MH XRP DW9072 DC9071 DCB120 DW9071 DW9072 DW953 DE9037 DE9071 DE9072 DE9074 DE9075 etc herramientas](images/loading.gif)
Mex $1,397.31
Mex $ 642 .00 Mex $642.00
Mex $2,718.40
Mex $ 1,359 .00 Mex $1,359.00
Mex $1,387.83
Mex $ 610 .00 Mex $610.00
Mex $699.00
Mex $ 356 .00 Mex $356.00