Very helpful doorstop for a door that won’t stop trying to swing closed slowly. These are small so there is no danger of a trip hazard. Great value, work exactly as expected.

Very useful

Very useful

Very useful

Very useful

Very useful

Very useful

Very useful

Very useful

I have been looking for something like this for a while. The doors in my upstairs upstairs have a very small room from the door to the floor. I have tried many doorstops. These are perfect and they look nice also.

Great tools for DIY home hobbyist.I do smash these sockets in the milwalkee impact gun! Been using them for months now, they are still going strong. I'm very surprised with the strength and quality.I'm tempted to buy a second set due to the price and quality.

Great tools for DIY home hobbyist.I do smash these sockets in the milwalkee impact gun! Been using them for months now, they are still going strong. I'm very surprised with the strength and quality.I'm tempted to buy a second set due to the price and quality.

Great tools for DIY home hobbyist.I do smash these sockets in the milwalkee impact gun! Been using them for months now, they are still going strong. I'm very surprised with the strength and quality.I'm tempted to buy a second set due to the price and quality.

Great tools for DIY home hobbyist.I do smash these sockets in the milwalkee impact gun! Been using them for months now, they are still going strong. I'm very surprised with the strength and quality.I'm tempted to buy a second set due to the price and quality.

Great tools for DIY home hobbyist.I do smash these sockets in the milwalkee impact gun! Been using them for months now, they are still going strong. I'm very surprised with the strength and quality.I'm tempted to buy a second set due to the price and quality.

Great tools for DIY home hobbyist.I do smash these sockets in the milwalkee impact gun! Been using them for months now, they are still going strong. I'm very surprised with the strength and quality.I'm tempted to buy a second set due to the price and quality.

Great tools for DIY home hobbyist.I do smash these sockets in the milwalkee impact gun! Been using them for months now, they are still going strong. I'm very surprised with the strength and quality.I'm tempted to buy a second set due to the price and quality.

Great tools for DIY home hobbyist.I do smash these sockets in the milwalkee impact gun! Been using them for months now, they are still going strong. I'm very surprised with the strength and quality.I'm tempted to buy a second set due to the price and quality.

Un gran set que muy buena calidad y aparte todas las medidas sin saltear ninguna como luego pasa en otras marcas,aparte a un muy buen precio de oferta

Un gran set que muy buena calidad y aparte todas las medidas sin saltear ninguna como luego pasa en otras marcas,aparte a un muy buen precio de oferta

Un gran set que muy buena calidad y aparte todas las medidas sin saltear ninguna como luego pasa en otras marcas,aparte a un muy buen precio de oferta

Un gran set que muy buena calidad y aparte todas las medidas sin saltear ninguna como luego pasa en otras marcas,aparte a un muy buen precio de oferta

Un gran set que muy buena calidad y aparte todas las medidas sin saltear ninguna como luego pasa en otras marcas,aparte a un muy buen precio de oferta

Un gran set que muy buena calidad y aparte todas las medidas sin saltear ninguna como luego pasa en otras marcas,aparte a un muy buen precio de oferta

Un gran set que muy buena calidad y aparte todas las medidas sin saltear ninguna como luego pasa en otras marcas,aparte a un muy buen precio de oferta

Un gran set que muy buena calidad y aparte todas las medidas sin saltear ninguna como luego pasa en otras marcas,aparte a un muy buen precio de oferta

Spot on!

Se siente de muy buena calidad

Se siente de muy buena calidad

Se siente de muy buena calidad

Se siente de muy buena calidad

Se siente de muy buena calidad

Se siente de muy buena calidad

Se siente de muy buena calidad

Se siente de muy buena calidad

I liked them. They look really cute. However it's true they are somewhat small and you need to stack them for most doors.

This set has every 1/2" drive socket that you're likely to ever need short of something extremely large. The fit-and-finish of the tools is top-notch, the 90-tooth ratchet is very smooth, and the case is durable. Overall an excellent value for a super-nice socket set. Do note that the full case weighs over 40 lbs and it covers a lot of real estate when opened flat so it isn't very handy to carry around and work out of. I knew this before buying and it isn't a problem for how I will use the set in the shop and around the farm but some folks might do better with several smaller sets if easier portability is important.

This set has every 1/2" drive socket that you're likely to ever need short of something extremely large. The fit-and-finish of the tools is top-notch, the 90-tooth ratchet is very smooth, and the case is durable. Overall an excellent value for a super-nice socket set. Do note that the full case weighs over 40 lbs and it covers a lot of real estate when opened flat so it isn't very handy to carry around and work out of. I knew this before buying and it isn't a problem for how I will use the set in the shop and around the farm but some folks might do better with several smaller sets if easier portability is important.

This set has every 1/2" drive socket that you're likely to ever need short of something extremely large. The fit-and-finish of the tools is top-notch, the 90-tooth ratchet is very smooth, and the case is durable. Overall an excellent value for a super-nice socket set. Do note that the full case weighs over 40 lbs and it covers a lot of real estate when opened flat so it isn't very handy to carry around and work out of. I knew this before buying and it isn't a problem for how I will use the set in the shop and around the farm but some folks might do better with several smaller sets if easier portability is important.

This set has every 1/2" drive socket that you're likely to ever need short of something extremely large. The fit-and-finish of the tools is top-notch, the 90-tooth ratchet is very smooth, and the case is durable. Overall an excellent value for a super-nice socket set. Do note that the full case weighs over 40 lbs and it covers a lot of real estate when opened flat so it isn't very handy to carry around and work out of. I knew this before buying and it isn't a problem for how I will use the set in the shop and around the farm but some folks might do better with several smaller sets if easier portability is important.

This set has every 1/2" drive socket that you're likely to ever need short of something extremely large. The fit-and-finish of the tools is top-notch, the 90-tooth ratchet is very smooth, and the case is durable. Overall an excellent value for a super-nice socket set. Do note that the full case weighs over 40 lbs and it covers a lot of real estate when opened flat so it isn't very handy to carry around and work out of. I knew this before buying and it isn't a problem for how I will use the set in the shop and around the farm but some folks might do better with several smaller sets if easier portability is important.

This set has every 1/2" drive socket that you're likely to ever need short of something extremely large. The fit-and-finish of the tools is top-notch, the 90-tooth ratchet is very smooth, and the case is durable. Overall an excellent value for a super-nice socket set. Do note that the full case weighs over 40 lbs and it covers a lot of real estate when opened flat so it isn't very handy to carry around and work out of. I knew this before buying and it isn't a problem for how I will use the set in the shop and around the farm but some folks might do better with several smaller sets if easier portability is important.

This set has every 1/2" drive socket that you're likely to ever need short of something extremely large. The fit-and-finish of the tools is top-notch, the 90-tooth ratchet is very smooth, and the case is durable. Overall an excellent value for a super-nice socket set. Do note that the full case weighs over 40 lbs and it covers a lot of real estate when opened flat so it isn't very handy to carry around and work out of. I knew this before buying and it isn't a problem for how I will use the set in the shop and around the farm but some folks might do better with several smaller sets if easier portability is important.

This set has every 1/2" drive socket that you're likely to ever need short of something extremely large. The fit-and-finish of the tools is top-notch, the 90-tooth ratchet is very smooth, and the case is durable. Overall an excellent value for a super-nice socket set. Do note that the full case weighs over 40 lbs and it covers a lot of real estate when opened flat so it isn't very handy to carry around and work out of. I knew this before buying and it isn't a problem for how I will use the set in the shop and around the farm but some folks might do better with several smaller sets if easier portability is important.

Sobre la funcionalidad es una apreciación y uso que le de cada uno, obviamente que se observa una calidad muy grande y viene en un caja muy linda y comoda para tener las herramientas ordenadas.Claro esta que es un set de 1/4 y es para trabajos livianos.

Sobre la funcionalidad es una apreciación y uso que le de cada uno, obviamente que se observa una calidad muy grande y viene en un caja muy linda y comoda para tener las herramientas ordenadas.Claro esta que es un set de 1/4 y es para trabajos livianos.

Sobre la funcionalidad es una apreciación y uso que le de cada uno, obviamente que se observa una calidad muy grande y viene en un caja muy linda y comoda para tener las herramientas ordenadas.Claro esta que es un set de 1/4 y es para trabajos livianos.

Sobre la funcionalidad es una apreciación y uso que le de cada uno, obviamente que se observa una calidad muy grande y viene en un caja muy linda y comoda para tener las herramientas ordenadas.Claro esta que es un set de 1/4 y es para trabajos livianos.

Sobre la funcionalidad es una apreciación y uso que le de cada uno, obviamente que se observa una calidad muy grande y viene en un caja muy linda y comoda para tener las herramientas ordenadas.Claro esta que es un set de 1/4 y es para trabajos livianos.

Sobre la funcionalidad es una apreciación y uso que le de cada uno, obviamente que se observa una calidad muy grande y viene en un caja muy linda y comoda para tener las herramientas ordenadas.Claro esta que es un set de 1/4 y es para trabajos livianos.

Sobre la funcionalidad es una apreciación y uso que le de cada uno, obviamente que se observa una calidad muy grande y viene en un caja muy linda y comoda para tener las herramientas ordenadas.Claro esta que es un set de 1/4 y es para trabajos livianos.

Sobre la funcionalidad es una apreciación y uso que le de cada uno, obviamente que se observa una calidad muy grande y viene en un caja muy linda y comoda para tener las herramientas ordenadas.Claro esta que es un set de 1/4 y es para trabajos livianos.

el juego viene muy completo sin saltarse medidas, todos los dados cortos y largos de 6 puntas que vas a necesitar para un cuadro de 3/8 los trae este juego. su calidad visualmente es muy buena y se sienten muy bien hecho. lo que mas resalta en este juego es su matraca de 90 dientes con cabesa reducida, honestamente es una chulada.

el juego viene muy completo sin saltarse medidas, todos los dados cortos y largos de 6 puntas que vas a necesitar para un cuadro de 3/8 los trae este juego. su calidad visualmente es muy buena y se sienten muy bien hecho. lo que mas resalta en este juego es su matraca de 90 dientes con cabesa reducida, honestamente es una chulada.

el juego viene muy completo sin saltarse medidas, todos los dados cortos y largos de 6 puntas que vas a necesitar para un cuadro de 3/8 los trae este juego. su calidad visualmente es muy buena y se sienten muy bien hecho. lo que mas resalta en este juego es su matraca de 90 dientes con cabesa reducida, honestamente es una chulada.

el juego viene muy completo sin saltarse medidas, todos los dados cortos y largos de 6 puntas que vas a necesitar para un cuadro de 3/8 los trae este juego. su calidad visualmente es muy buena y se sienten muy bien hecho. lo que mas resalta en este juego es su matraca de 90 dientes con cabesa reducida, honestamente es una chulada.

el juego viene muy completo sin saltarse medidas, todos los dados cortos y largos de 6 puntas que vas a necesitar para un cuadro de 3/8 los trae este juego. su calidad visualmente es muy buena y se sienten muy bien hecho. lo que mas resalta en este juego es su matraca de 90 dientes con cabesa reducida, honestamente es una chulada.

el juego viene muy completo sin saltarse medidas, todos los dados cortos y largos de 6 puntas que vas a necesitar para un cuadro de 3/8 los trae este juego. su calidad visualmente es muy buena y se sienten muy bien hecho. lo que mas resalta en este juego es su matraca de 90 dientes con cabesa reducida, honestamente es una chulada.

el juego viene muy completo sin saltarse medidas, todos los dados cortos y largos de 6 puntas que vas a necesitar para un cuadro de 3/8 los trae este juego. su calidad visualmente es muy buena y se sienten muy bien hecho. lo que mas resalta en este juego es su matraca de 90 dientes con cabesa reducida, honestamente es una chulada.

el juego viene muy completo sin saltarse medidas, todos los dados cortos y largos de 6 puntas que vas a necesitar para un cuadro de 3/8 los trae este juego. su calidad visualmente es muy buena y se sienten muy bien hecho. lo que mas resalta en este juego es su matraca de 90 dientes con cabesa reducida, honestamente es una chulada.

Para mí son las mejores. Caben en las ranuras pequeñas.

El set es muy completo y no se salta ninguna medida tanto en Métrico como en Imperial, dados cortos.y profundos por igual.El ratchet es de 90 dientes y relativamente corto, ideal para espacios reducidos. La cabeza es pequeña y en general es ligero.La palanca (breaker bar) es aceptable, considera comprar una de 24 pulgadas para cuándo realmente necesites aplicar fuerza.El acabado de cromo es bastante bueno. El precio que pagué fueron $2,174Lo que no m gusto para nada, es que AMAZON ME MANDÓ UN SET USADO, sí los sellos de la caja de cartón llegan rotos, y la caja de la herramienta no tiene su etiqueta de presentación, regresalo y pide un reemplazo.Los míos llegaron con dados de 1/4, muy viejos, dentro de los dados del set, atorados.Solamente porque regresar las cosas en la frontera es un verdadero dolor de cabeza me los quedé y los removí con un desarmador y martillo.Pero la herramienta no tiene ningún problema.

El set es muy completo y no se salta ninguna medida tanto en Métrico como en Imperial, dados cortos.y profundos por igual.El ratchet es de 90 dientes y relativamente corto, ideal para espacios reducidos. La cabeza es pequeña y en general es ligero.La palanca (breaker bar) es aceptable, considera comprar una de 24 pulgadas para cuándo realmente necesites aplicar fuerza.El acabado de cromo es bastante bueno. El precio que pagué fueron $2,174Lo que no m gusto para nada, es que AMAZON ME MANDÓ UN SET USADO, sí los sellos de la caja de cartón llegan rotos, y la caja de la herramienta no tiene su etiqueta de presentación, regresalo y pide un reemplazo.Los míos llegaron con dados de 1/4, muy viejos, dentro de los dados del set, atorados.Solamente porque regresar las cosas en la frontera es un verdadero dolor de cabeza me los quedé y los removí con un desarmador y martillo.Pero la herramienta no tiene ningún problema.

El set es muy completo y no se salta ninguna medida tanto en Métrico como en Imperial, dados cortos.y profundos por igual.El ratchet es de 90 dientes y relativamente corto, ideal para espacios reducidos. La cabeza es pequeña y en general es ligero.La palanca (breaker bar) es aceptable, considera comprar una de 24 pulgadas para cuándo realmente necesites aplicar fuerza.El acabado de cromo es bastante bueno. El precio que pagué fueron $2,174Lo que no m gusto para nada, es que AMAZON ME MANDÓ UN SET USADO, sí los sellos de la caja de cartón llegan rotos, y la caja de la herramienta no tiene su etiqueta de presentación, regresalo y pide un reemplazo.Los míos llegaron con dados de 1/4, muy viejos, dentro de los dados del set, atorados.Solamente porque regresar las cosas en la frontera es un verdadero dolor de cabeza me los quedé y los removí con un desarmador y martillo.Pero la herramienta no tiene ningún problema.

El set es muy completo y no se salta ninguna medida tanto en Métrico como en Imperial, dados cortos.y profundos por igual.El ratchet es de 90 dientes y relativamente corto, ideal para espacios reducidos. La cabeza es pequeña y en general es ligero.La palanca (breaker bar) es aceptable, considera comprar una de 24 pulgadas para cuándo realmente necesites aplicar fuerza.El acabado de cromo es bastante bueno. El precio que pagué fueron $2,174Lo que no m gusto para nada, es que AMAZON ME MANDÓ UN SET USADO, sí los sellos de la caja de cartón llegan rotos, y la caja de la herramienta no tiene su etiqueta de presentación, regresalo y pide un reemplazo.Los míos llegaron con dados de 1/4, muy viejos, dentro de los dados del set, atorados.Solamente porque regresar las cosas en la frontera es un verdadero dolor de cabeza me los quedé y los removí con un desarmador y martillo.Pero la herramienta no tiene ningún problema.

El set es muy completo y no se salta ninguna medida tanto en Métrico como en Imperial, dados cortos.y profundos por igual.El ratchet es de 90 dientes y relativamente corto, ideal para espacios reducidos. La cabeza es pequeña y en general es ligero.La palanca (breaker bar) es aceptable, considera comprar una de 24 pulgadas para cuándo realmente necesites aplicar fuerza.El acabado de cromo es bastante bueno. El precio que pagué fueron $2,174Lo que no m gusto para nada, es que AMAZON ME MANDÓ UN SET USADO, sí los sellos de la caja de cartón llegan rotos, y la caja de la herramienta no tiene su etiqueta de presentación, regresalo y pide un reemplazo.Los míos llegaron con dados de 1/4, muy viejos, dentro de los dados del set, atorados.Solamente porque regresar las cosas en la frontera es un verdadero dolor de cabeza me los quedé y los removí con un desarmador y martillo.Pero la herramienta no tiene ningún problema.

El set es muy completo y no se salta ninguna medida tanto en Métrico como en Imperial, dados cortos.y profundos por igual.El ratchet es de 90 dientes y relativamente corto, ideal para espacios reducidos. La cabeza es pequeña y en general es ligero.La palanca (breaker bar) es aceptable, considera comprar una de 24 pulgadas para cuándo realmente necesites aplicar fuerza.El acabado de cromo es bastante bueno. El precio que pagué fueron $2,174Lo que no m gusto para nada, es que AMAZON ME MANDÓ UN SET USADO, sí los sellos de la caja de cartón llegan rotos, y la caja de la herramienta no tiene su etiqueta de presentación, regresalo y pide un reemplazo.Los míos llegaron con dados de 1/4, muy viejos, dentro de los dados del set, atorados.Solamente porque regresar las cosas en la frontera es un verdadero dolor de cabeza me los quedé y los removí con un desarmador y martillo.Pero la herramienta no tiene ningún problema.

El set es muy completo y no se salta ninguna medida tanto en Métrico como en Imperial, dados cortos.y profundos por igual.El ratchet es de 90 dientes y relativamente corto, ideal para espacios reducidos. La cabeza es pequeña y en general es ligero.La palanca (breaker bar) es aceptable, considera comprar una de 24 pulgadas para cuándo realmente necesites aplicar fuerza.El acabado de cromo es bastante bueno. El precio que pagué fueron $2,174Lo que no m gusto para nada, es que AMAZON ME MANDÓ UN SET USADO, sí los sellos de la caja de cartón llegan rotos, y la caja de la herramienta no tiene su etiqueta de presentación, regresalo y pide un reemplazo.Los míos llegaron con dados de 1/4, muy viejos, dentro de los dados del set, atorados.Solamente porque regresar las cosas en la frontera es un verdadero dolor de cabeza me los quedé y los removí con un desarmador y martillo.Pero la herramienta no tiene ningún problema.

El set es muy completo y no se salta ninguna medida tanto en Métrico como en Imperial, dados cortos.y profundos por igual.El ratchet es de 90 dientes y relativamente corto, ideal para espacios reducidos. La cabeza es pequeña y en general es ligero.La palanca (breaker bar) es aceptable, considera comprar una de 24 pulgadas para cuándo realmente necesites aplicar fuerza.El acabado de cromo es bastante bueno. El precio que pagué fueron $2,174Lo que no m gusto para nada, es que AMAZON ME MANDÓ UN SET USADO, sí los sellos de la caja de cartón llegan rotos, y la caja de la herramienta no tiene su etiqueta de presentación, regresalo y pide un reemplazo.Los míos llegaron con dados de 1/4, muy viejos, dentro de los dados del set, atorados.Solamente porque regresar las cosas en la frontera es un verdadero dolor de cabeza me los quedé y los removí con un desarmador y martillo.Pero la herramienta no tiene ningún problema.

Bought this set to use at work in Indusrial Maintenance to replace the same set, but 72 tooth and take the 72 tooth set home. Overall, extremely pleased with the set, even the previous one was great, but we have a lot of spaces where the extra teeth are much appreciated.

Bought this set to use at work in Indusrial Maintenance to replace the same set, but 72 tooth and take the 72 tooth set home. Overall, extremely pleased with the set, even the previous one was great, but we have a lot of spaces where the extra teeth are much appreciated.

Bought this set to use at work in Indusrial Maintenance to replace the same set, but 72 tooth and take the 72 tooth set home. Overall, extremely pleased with the set, even the previous one was great, but we have a lot of spaces where the extra teeth are much appreciated.

Bought this set to use at work in Indusrial Maintenance to replace the same set, but 72 tooth and take the 72 tooth set home. Overall, extremely pleased with the set, even the previous one was great, but we have a lot of spaces where the extra teeth are much appreciated.

Bought this set to use at work in Indusrial Maintenance to replace the same set, but 72 tooth and take the 72 tooth set home. Overall, extremely pleased with the set, even the previous one was great, but we have a lot of spaces where the extra teeth are much appreciated.

Bought this set to use at work in Indusrial Maintenance to replace the same set, but 72 tooth and take the 72 tooth set home. Overall, extremely pleased with the set, even the previous one was great, but we have a lot of spaces where the extra teeth are much appreciated.

Bought this set to use at work in Indusrial Maintenance to replace the same set, but 72 tooth and take the 72 tooth set home. Overall, extremely pleased with the set, even the previous one was great, but we have a lot of spaces where the extra teeth are much appreciated.

Bought this set to use at work in Indusrial Maintenance to replace the same set, but 72 tooth and take the 72 tooth set home. Overall, extremely pleased with the set, even the previous one was great, but we have a lot of spaces where the extra teeth are much appreciated.

I ended up looking at other brands because of the negative opinions of the ratchet wrench in the old version of this kit. I am glad that I eventually settled on this updated version, even though it is a little more expensive. At the time of purchase, the difference was a little over $5, but well worth it. Now the difference is only $2, so it is a no-brainer.What do you get for the extra money though? Well 4 extra metric sockets (4mm & 4.5mm, normal and deep sockets). These might sound odd sizes, but I have already needed mine... The main difference however must be the ratchet wrench. In the old set, there were many criticisms of it - Apparently they listened very closely, because the wrench in here shows none of those problems. It has 90 teeth in the ratchet per complete turn, so one click per 4 degrees. It has proved solid and reliable so far. I will confess to one embarassing thing though...I was thinking at first that the wrench was faulty, because I could not get anything to fit on it over the little ball bearing. I am used to the ball bearings being spring loaded and providing a friction fit for the socketes. However, then I found that the small button in the centre of the back of the rachet head, released the ball bearing so things fitted fitted perfectly now! Nothing can fall off as you have to release it with the button to get it free. Ugh, I felt stupid until I realised the only other wrench I have used with a button there was a good few years ago, but there the button released the lever to reverse the direction of the ratchet. Now the little lever getting moved accidentally was a criticism of the old wrench, but on this new wrench I found that while it moved very easily it was still sufficiently recessed that I have not yet caught it by accident.The sockets seem to be well made, like everything in this kit, they are very smooth and well-finished. So much so in fact, that perhaps in future kits they might want to look into knurling a bit of them to make them easier to keep hold of with greasy/oily fingers? I do appreciate the sizes being marked onto them so clearly, although the sizes seemed to be more like laser etched than embossed on mine.The case is actually useable! Typically blow-molded cases are a loose fit on the parts, but mine were perfect with all the parts being gripped tightly, but not too tightly. The hinges and latches were fine and worked well enough. For the case, the biggest plus by far for me was the inclusion of a decent sized space for screws, etc. Yes, very useful for that...but mine immediately got used to house strips of 1/4" hex screwdriver bits since this kit has an accurate adaptor to allow the 1/4" square drive to work with 1/4" hex bits. I do have one criticism/recomendation though, and that is as so many have noted in their reviews - This kit would really benefit from having a handle for the case.The handle of the wrench would also benefit from being knurled I thought at first, but I actually found I could keep a fine enough grip on it as it was, just from it's shape. Knurling there could make your palms sore after a lot of use. The extension bars might perhaps have benefitted from some knurling though. Also I know some like extension bars to be "wobble bars" so that they have a little wiggle room in difficult situations. The bars here do have a little bit of room for maneuver, but are not meant to be wobble bars. This is not a bad thing, as wobble bars will wear very quickly if you try to use them as often as normal extension bars. This set has a very good quality universal joint anyway, so I really do not see much benefit in wobble bars - Again Tekton have chosen well.Those who buy the very top name brand tools might well look down on tools like these, but I believe only in the most extreme situations where you are destroying the tool through misuse anyway, would you be likely to see any difference? For me, I will take seemingly 98% of that quality, for likely less than 10% of that cost. One last point as well. The whole set is pleasingly heavy to pick up! I did not realise how used to poor quality tools I had become accustomed to over the years, but as soon as you handle these, you can feel that quality. Everything feels very substantial and well-made. This set is the first Tekton product I have bought, but I am so pleased with it that I will be buying their letter and number stamps when I have the money.

I ended up looking at other brands because of the negative opinions of the ratchet wrench in the old version of this kit. I am glad that I eventually settled on this updated version, even though it is a little more expensive. At the time of purchase, the difference was a little over $5, but well worth it. Now the difference is only $2, so it is a no-brainer.What do you get for the extra money though? Well 4 extra metric sockets (4mm & 4.5mm, normal and deep sockets). These might sound odd sizes, but I have already needed mine... The main difference however must be the ratchet wrench. In the old set, there were many criticisms of it - Apparently they listened very closely, because the wrench in here shows none of those problems. It has 90 teeth in the ratchet per complete turn, so one click per 4 degrees. It has proved solid and reliable so far. I will confess to one embarassing thing though...I was thinking at first that the wrench was faulty, because I could not get anything to fit on it over the little ball bearing. I am used to the ball bearings being spring loaded and providing a friction fit for the socketes. However, then I found that the small button in the centre of the back of the rachet head, released the ball bearing so things fitted fitted perfectly now! Nothing can fall off as you have to release it with the button to get it free. Ugh, I felt stupid until I realised the only other wrench I have used with a button there was a good few years ago, but there the button released the lever to reverse the direction of the ratchet. Now the little lever getting moved accidentally was a criticism of the old wrench, but on this new wrench I found that while it moved very easily it was still sufficiently recessed that I have not yet caught it by accident.The sockets seem to be well made, like everything in this kit, they are very smooth and well-finished. So much so in fact, that perhaps in future kits they might want to look into knurling a bit of them to make them easier to keep hold of with greasy/oily fingers? I do appreciate the sizes being marked onto them so clearly, although the sizes seemed to be more like laser etched than embossed on mine.The case is actually useable! Typically blow-molded cases are a loose fit on the parts, but mine were perfect with all the parts being gripped tightly, but not too tightly. The hinges and latches were fine and worked well enough. For the case, the biggest plus by far for me was the inclusion of a decent sized space for screws, etc. Yes, very useful for that...but mine immediately got used to house strips of 1/4" hex screwdriver bits since this kit has an accurate adaptor to allow the 1/4" square drive to work with 1/4" hex bits. I do have one criticism/recomendation though, and that is as so many have noted in their reviews - This kit would really benefit from having a handle for the case.The handle of the wrench would also benefit from being knurled I thought at first, but I actually found I could keep a fine enough grip on it as it was, just from it's shape. Knurling there could make your palms sore after a lot of use. The extension bars might perhaps have benefitted from some knurling though. Also I know some like extension bars to be "wobble bars" so that they have a little wiggle room in difficult situations. The bars here do have a little bit of room for maneuver, but are not meant to be wobble bars. This is not a bad thing, as wobble bars will wear very quickly if you try to use them as often as normal extension bars. This set has a very good quality universal joint anyway, so I really do not see much benefit in wobble bars - Again Tekton have chosen well.Those who buy the very top name brand tools might well look down on tools like these, but I believe only in the most extreme situations where you are destroying the tool through misuse anyway, would you be likely to see any difference? For me, I will take seemingly 98% of that quality, for likely less than 10% of that cost. One last point as well. The whole set is pleasingly heavy to pick up! I did not realise how used to poor quality tools I had become accustomed to over the years, but as soon as you handle these, you can feel that quality. Everything feels very substantial and well-made. This set is the first Tekton product I have bought, but I am so pleased with it that I will be buying their letter and number stamps when I have the money.

I ended up looking at other brands because of the negative opinions of the ratchet wrench in the old version of this kit. I am glad that I eventually settled on this updated version, even though it is a little more expensive. At the time of purchase, the difference was a little over $5, but well worth it. Now the difference is only $2, so it is a no-brainer.What do you get for the extra money though? Well 4 extra metric sockets (4mm & 4.5mm, normal and deep sockets). These might sound odd sizes, but I have already needed mine... The main difference however must be the ratchet wrench. In the old set, there were many criticisms of it - Apparently they listened very closely, because the wrench in here shows none of those problems. It has 90 teeth in the ratchet per complete turn, so one click per 4 degrees. It has proved solid and reliable so far. I will confess to one embarassing thing though...I was thinking at first that the wrench was faulty, because I could not get anything to fit on it over the little ball bearing. I am used to the ball bearings being spring loaded and providing a friction fit for the socketes. However, then I found that the small button in the centre of the back of the rachet head, released the ball bearing so things fitted fitted perfectly now! Nothing can fall off as you have to release it with the button to get it free. Ugh, I felt stupid until I realised the only other wrench I have used with a button there was a good few years ago, but there the button released the lever to reverse the direction of the ratchet. Now the little lever getting moved accidentally was a criticism of the old wrench, but on this new wrench I found that while it moved very easily it was still sufficiently recessed that I have not yet caught it by accident.The sockets seem to be well made, like everything in this kit, they are very smooth and well-finished. So much so in fact, that perhaps in future kits they might want to look into knurling a bit of them to make them easier to keep hold of with greasy/oily fingers? I do appreciate the sizes being marked onto them so clearly, although the sizes seemed to be more like laser etched than embossed on mine.The case is actually useable! Typically blow-molded cases are a loose fit on the parts, but mine were perfect with all the parts being gripped tightly, but not too tightly. The hinges and latches were fine and worked well enough. For the case, the biggest plus by far for me was the inclusion of a decent sized space for screws, etc. Yes, very useful for that...but mine immediately got used to house strips of 1/4" hex screwdriver bits since this kit has an accurate adaptor to allow the 1/4" square drive to work with 1/4" hex bits. I do have one criticism/recomendation though, and that is as so many have noted in their reviews - This kit would really benefit from having a handle for the case.The handle of the wrench would also benefit from being knurled I thought at first, but I actually found I could keep a fine enough grip on it as it was, just from it's shape. Knurling there could make your palms sore after a lot of use. The extension bars might perhaps have benefitted from some knurling though. Also I know some like extension bars to be "wobble bars" so that they have a little wiggle room in difficult situations. The bars here do have a little bit of room for maneuver, but are not meant to be wobble bars. This is not a bad thing, as wobble bars will wear very quickly if you try to use them as often as normal extension bars. This set has a very good quality universal joint anyway, so I really do not see much benefit in wobble bars - Again Tekton have chosen well.Those who buy the very top name brand tools might well look down on tools like these, but I believe only in the most extreme situations where you are destroying the tool through misuse anyway, would you be likely to see any difference? For me, I will take seemingly 98% of that quality, for likely less than 10% of that cost. One last point as well. The whole set is pleasingly heavy to pick up! I did not realise how used to poor quality tools I had become accustomed to over the years, but as soon as you handle these, you can feel that quality. Everything feels very substantial and well-made. This set is the first Tekton product I have bought, but I am so pleased with it that I will be buying their letter and number stamps when I have the money.

I ended up looking at other brands because of the negative opinions of the ratchet wrench in the old version of this kit. I am glad that I eventually settled on this updated version, even though it is a little more expensive. At the time of purchase, the difference was a little over $5, but well worth it. Now the difference is only $2, so it is a no-brainer.What do you get for the extra money though? Well 4 extra metric sockets (4mm & 4.5mm, normal and deep sockets). These might sound odd sizes, but I have already needed mine... The main difference however must be the ratchet wrench. In the old set, there were many criticisms of it - Apparently they listened very closely, because the wrench in here shows none of those problems. It has 90 teeth in the ratchet per complete turn, so one click per 4 degrees. It has proved solid and reliable so far. I will confess to one embarassing thing though...I was thinking at first that the wrench was faulty, because I could not get anything to fit on it over the little ball bearing. I am used to the ball bearings being spring loaded and providing a friction fit for the socketes. However, then I found that the small button in the centre of the back of the rachet head, released the ball bearing so things fitted fitted perfectly now! Nothing can fall off as you have to release it with the button to get it free. Ugh, I felt stupid until I realised the only other wrench I have used with a button there was a good few years ago, but there the button released the lever to reverse the direction of the ratchet. Now the little lever getting moved accidentally was a criticism of the old wrench, but on this new wrench I found that while it moved very easily it was still sufficiently recessed that I have not yet caught it by accident.The sockets seem to be well made, like everything in this kit, they are very smooth and well-finished. So much so in fact, that perhaps in future kits they might want to look into knurling a bit of them to make them easier to keep hold of with greasy/oily fingers? I do appreciate the sizes being marked onto them so clearly, although the sizes seemed to be more like laser etched than embossed on mine.The case is actually useable! Typically blow-molded cases are a loose fit on the parts, but mine were perfect with all the parts being gripped tightly, but not too tightly. The hinges and latches were fine and worked well enough. For the case, the biggest plus by far for me was the inclusion of a decent sized space for screws, etc. Yes, very useful for that...but mine immediately got used to house strips of 1/4" hex screwdriver bits since this kit has an accurate adaptor to allow the 1/4" square drive to work with 1/4" hex bits. I do have one criticism/recomendation though, and that is as so many have noted in their reviews - This kit would really benefit from having a handle for the case.The handle of the wrench would also benefit from being knurled I thought at first, but I actually found I could keep a fine enough grip on it as it was, just from it's shape. Knurling there could make your palms sore after a lot of use. The extension bars might perhaps have benefitted from some knurling though. Also I know some like extension bars to be "wobble bars" so that they have a little wiggle room in difficult situations. The bars here do have a little bit of room for maneuver, but are not meant to be wobble bars. This is not a bad thing, as wobble bars will wear very quickly if you try to use them as often as normal extension bars. This set has a very good quality universal joint anyway, so I really do not see much benefit in wobble bars - Again Tekton have chosen well.Those who buy the very top name brand tools might well look down on tools like these, but I believe only in the most extreme situations where you are destroying the tool through misuse anyway, would you be likely to see any difference? For me, I will take seemingly 98% of that quality, for likely less than 10% of that cost. One last point as well. The whole set is pleasingly heavy to pick up! I did not realise how used to poor quality tools I had become accustomed to over the years, but as soon as you handle these, you can feel that quality. Everything feels very substantial and well-made. This set is the first Tekton product I have bought, but I am so pleased with it that I will be buying their letter and number stamps when I have the money.

I ended up looking at other brands because of the negative opinions of the ratchet wrench in the old version of this kit. I am glad that I eventually settled on this updated version, even though it is a little more expensive. At the time of purchase, the difference was a little over $5, but well worth it. Now the difference is only $2, so it is a no-brainer.What do you get for the extra money though? Well 4 extra metric sockets (4mm & 4.5mm, normal and deep sockets). These might sound odd sizes, but I have already needed mine... The main difference however must be the ratchet wrench. In the old set, there were many criticisms of it - Apparently they listened very closely, because the wrench in here shows none of those problems. It has 90 teeth in the ratchet per complete turn, so one click per 4 degrees. It has proved solid and reliable so far. I will confess to one embarassing thing though...I was thinking at first that the wrench was faulty, because I could not get anything to fit on it over the little ball bearing. I am used to the ball bearings being spring loaded and providing a friction fit for the socketes. However, then I found that the small button in the centre of the back of the rachet head, released the ball bearing so things fitted fitted perfectly now! Nothing can fall off as you have to release it with the button to get it free. Ugh, I felt stupid until I realised the only other wrench I have used with a button there was a good few years ago, but there the button released the lever to reverse the direction of the ratchet. Now the little lever getting moved accidentally was a criticism of the old wrench, but on this new wrench I found that while it moved very easily it was still sufficiently recessed that I have not yet caught it by accident.The sockets seem to be well made, like everything in this kit, they are very smooth and well-finished. So much so in fact, that perhaps in future kits they might want to look into knurling a bit of them to make them easier to keep hold of with greasy/oily fingers? I do appreciate the sizes being marked onto them so clearly, although the sizes seemed to be more like laser etched than embossed on mine.The case is actually useable! Typically blow-molded cases are a loose fit on the parts, but mine were perfect with all the parts being gripped tightly, but not too tightly. The hinges and latches were fine and worked well enough. For the case, the biggest plus by far for me was the inclusion of a decent sized space for screws, etc. Yes, very useful for that...but mine immediately got used to house strips of 1/4" hex screwdriver bits since this kit has an accurate adaptor to allow the 1/4" square drive to work with 1/4" hex bits. I do have one criticism/recomendation though, and that is as so many have noted in their reviews - This kit would really benefit from having a handle for the case.The handle of the wrench would also benefit from being knurled I thought at first, but I actually found I could keep a fine enough grip on it as it was, just from it's shape. Knurling there could make your palms sore after a lot of use. The extension bars might perhaps have benefitted from some knurling though. Also I know some like extension bars to be "wobble bars" so that they have a little wiggle room in difficult situations. The bars here do have a little bit of room for maneuver, but are not meant to be wobble bars. This is not a bad thing, as wobble bars will wear very quickly if you try to use them as often as normal extension bars. This set has a very good quality universal joint anyway, so I really do not see much benefit in wobble bars - Again Tekton have chosen well.Those who buy the very top name brand tools might well look down on tools like these, but I believe only in the most extreme situations where you are destroying the tool through misuse anyway, would you be likely to see any difference? For me, I will take seemingly 98% of that quality, for likely less than 10% of that cost. One last point as well. The whole set is pleasingly heavy to pick up! I did not realise how used to poor quality tools I had become accustomed to over the years, but as soon as you handle these, you can feel that quality. Everything feels very substantial and well-made. This set is the first Tekton product I have bought, but I am so pleased with it that I will be buying their letter and number stamps when I have the money.

I ended up looking at other brands because of the negative opinions of the ratchet wrench in the old version of this kit. I am glad that I eventually settled on this updated version, even though it is a little more expensive. At the time of purchase, the difference was a little over $5, but well worth it. Now the difference is only $2, so it is a no-brainer.What do you get for the extra money though? Well 4 extra metric sockets (4mm & 4.5mm, normal and deep sockets). These might sound odd sizes, but I have already needed mine... The main difference however must be the ratchet wrench. In the old set, there were many criticisms of it - Apparently they listened very closely, because the wrench in here shows none of those problems. It has 90 teeth in the ratchet per complete turn, so one click per 4 degrees. It has proved solid and reliable so far. I will confess to one embarassing thing though...I was thinking at first that the wrench was faulty, because I could not get anything to fit on it over the little ball bearing. I am used to the ball bearings being spring loaded and providing a friction fit for the socketes. However, then I found that the small button in the centre of the back of the rachet head, released the ball bearing so things fitted fitted perfectly now! Nothing can fall off as you have to release it with the button to get it free. Ugh, I felt stupid until I realised the only other wrench I have used with a button there was a good few years ago, but there the button released the lever to reverse the direction of the ratchet. Now the little lever getting moved accidentally was a criticism of the old wrench, but on this new wrench I found that while it moved very easily it was still sufficiently recessed that I have not yet caught it by accident.The sockets seem to be well made, like everything in this kit, they are very smooth and well-finished. So much so in fact, that perhaps in future kits they might want to look into knurling a bit of them to make them easier to keep hold of with greasy/oily fingers? I do appreciate the sizes being marked onto them so clearly, although the sizes seemed to be more like laser etched than embossed on mine.The case is actually useable! Typically blow-molded cases are a loose fit on the parts, but mine were perfect with all the parts being gripped tightly, but not too tightly. The hinges and latches were fine and worked well enough. For the case, the biggest plus by far for me was the inclusion of a decent sized space for screws, etc. Yes, very useful for that...but mine immediately got used to house strips of 1/4" hex screwdriver bits since this kit has an accurate adaptor to allow the 1/4" square drive to work with 1/4" hex bits. I do have one criticism/recomendation though, and that is as so many have noted in their reviews - This kit would really benefit from having a handle for the case.The handle of the wrench would also benefit from being knurled I thought at first, but I actually found I could keep a fine enough grip on it as it was, just from it's shape. Knurling there could make your palms sore after a lot of use. The extension bars might perhaps have benefitted from some knurling though. Also I know some like extension bars to be "wobble bars" so that they have a little wiggle room in difficult situations. The bars here do have a little bit of room for maneuver, but are not meant to be wobble bars. This is not a bad thing, as wobble bars will wear very quickly if you try to use them as often as normal extension bars. This set has a very good quality universal joint anyway, so I really do not see much benefit in wobble bars - Again Tekton have chosen well.Those who buy the very top name brand tools might well look down on tools like these, but I believe only in the most extreme situations where you are destroying the tool through misuse anyway, would you be likely to see any difference? For me, I will take seemingly 98% of that quality, for likely less than 10% of that cost. One last point as well. The whole set is pleasingly heavy to pick up! I did not realise how used to poor quality tools I had become accustomed to over the years, but as soon as you handle these, you can feel that quality. Everything feels very substantial and well-made. This set is the first Tekton product I have bought, but I am so pleased with it that I will be buying their letter and number stamps when I have the money.

I ended up looking at other brands because of the negative opinions of the ratchet wrench in the old version of this kit. I am glad that I eventually settled on this updated version, even though it is a little more expensive. At the time of purchase, the difference was a little over $5, but well worth it. Now the difference is only $2, so it is a no-brainer.What do you get for the extra money though? Well 4 extra metric sockets (4mm & 4.5mm, normal and deep sockets). These might sound odd sizes, but I have already needed mine... The main difference however must be the ratchet wrench. In the old set, there were many criticisms of it - Apparently they listened very closely, because the wrench in here shows none of those problems. It has 90 teeth in the ratchet per complete turn, so one click per 4 degrees. It has proved solid and reliable so far. I will confess to one embarassing thing though...I was thinking at first that the wrench was faulty, because I could not get anything to fit on it over the little ball bearing. I am used to the ball bearings being spring loaded and providing a friction fit for the socketes. However, then I found that the small button in the centre of the back of the rachet head, released the ball bearing so things fitted fitted perfectly now! Nothing can fall off as you have to release it with the button to get it free. Ugh, I felt stupid until I realised the only other wrench I have used with a button there was a good few years ago, but there the button released the lever to reverse the direction of the ratchet. Now the little lever getting moved accidentally was a criticism of the old wrench, but on this new wrench I found that while it moved very easily it was still sufficiently recessed that I have not yet caught it by accident.The sockets seem to be well made, like everything in this kit, they are very smooth and well-finished. So much so in fact, that perhaps in future kits they might want to look into knurling a bit of them to make them easier to keep hold of with greasy/oily fingers? I do appreciate the sizes being marked onto them so clearly, although the sizes seemed to be more like laser etched than embossed on mine.The case is actually useable! Typically blow-molded cases are a loose fit on the parts, but mine were perfect with all the parts being gripped tightly, but not too tightly. The hinges and latches were fine and worked well enough. For the case, the biggest plus by far for me was the inclusion of a decent sized space for screws, etc. Yes, very useful for that...but mine immediately got used to house strips of 1/4" hex screwdriver bits since this kit has an accurate adaptor to allow the 1/4" square drive to work with 1/4" hex bits. I do have one criticism/recomendation though, and that is as so many have noted in their reviews - This kit would really benefit from having a handle for the case.The handle of the wrench would also benefit from being knurled I thought at first, but I actually found I could keep a fine enough grip on it as it was, just from it's shape. Knurling there could make your palms sore after a lot of use. The extension bars might perhaps have benefitted from some knurling though. Also I know some like extension bars to be "wobble bars" so that they have a little wiggle room in difficult situations. The bars here do have a little bit of room for maneuver, but are not meant to be wobble bars. This is not a bad thing, as wobble bars will wear very quickly if you try to use them as often as normal extension bars. This set has a very good quality universal joint anyway, so I really do not see much benefit in wobble bars - Again Tekton have chosen well.Those who buy the very top name brand tools might well look down on tools like these, but I believe only in the most extreme situations where you are destroying the tool through misuse anyway, would you be likely to see any difference? For me, I will take seemingly 98% of that quality, for likely less than 10% of that cost. One last point as well. The whole set is pleasingly heavy to pick up! I did not realise how used to poor quality tools I had become accustomed to over the years, but as soon as you handle these, you can feel that quality. Everything feels very substantial and well-made. This set is the first Tekton product I have bought, but I am so pleased with it that I will be buying their letter and number stamps when I have the money.

I ended up looking at other brands because of the negative opinions of the ratchet wrench in the old version of this kit. I am glad that I eventually settled on this updated version, even though it is a little more expensive. At the time of purchase, the difference was a little over $5, but well worth it. Now the difference is only $2, so it is a no-brainer.What do you get for the extra money though? Well 4 extra metric sockets (4mm & 4.5mm, normal and deep sockets). These might sound odd sizes, but I have already needed mine... The main difference however must be the ratchet wrench. In the old set, there were many criticisms of it - Apparently they listened very closely, because the wrench in here shows none of those problems. It has 90 teeth in the ratchet per complete turn, so one click per 4 degrees. It has proved solid and reliable so far. I will confess to one embarassing thing though...I was thinking at first that the wrench was faulty, because I could not get anything to fit on it over the little ball bearing. I am used to the ball bearings being spring loaded and providing a friction fit for the socketes. However, then I found that the small button in the centre of the back of the rachet head, released the ball bearing so things fitted fitted perfectly now! Nothing can fall off as you have to release it with the button to get it free. Ugh, I felt stupid until I realised the only other wrench I have used with a button there was a good few years ago, but there the button released the lever to reverse the direction of the ratchet. Now the little lever getting moved accidentally was a criticism of the old wrench, but on this new wrench I found that while it moved very easily it was still sufficiently recessed that I have not yet caught it by accident.The sockets seem to be well made, like everything in this kit, they are very smooth and well-finished. So much so in fact, that perhaps in future kits they might want to look into knurling a bit of them to make them easier to keep hold of with greasy/oily fingers? I do appreciate the sizes being marked onto them so clearly, although the sizes seemed to be more like laser etched than embossed on mine.The case is actually useable! Typically blow-molded cases are a loose fit on the parts, but mine were perfect with all the parts being gripped tightly, but not too tightly. The hinges and latches were fine and worked well enough. For the case, the biggest plus by far for me was the inclusion of a decent sized space for screws, etc. Yes, very useful for that...but mine immediately got used to house strips of 1/4" hex screwdriver bits since this kit has an accurate adaptor to allow the 1/4" square drive to work with 1/4" hex bits. I do have one criticism/recomendation though, and that is as so many have noted in their reviews - This kit would really benefit from having a handle for the case.The handle of the wrench would also benefit from being knurled I thought at first, but I actually found I could keep a fine enough grip on it as it was, just from it's shape. Knurling there could make your palms sore after a lot of use. The extension bars might perhaps have benefitted from some knurling though. Also I know some like extension bars to be "wobble bars" so that they have a little wiggle room in difficult situations. The bars here do have a little bit of room for maneuver, but are not meant to be wobble bars. This is not a bad thing, as wobble bars will wear very quickly if you try to use them as often as normal extension bars. This set has a very good quality universal joint anyway, so I really do not see much benefit in wobble bars - Again Tekton have chosen well.Those who buy the very top name brand tools might well look down on tools like these, but I believe only in the most extreme situations where you are destroying the tool through misuse anyway, would you be likely to see any difference? For me, I will take seemingly 98% of that quality, for likely less than 10% of that cost. One last point as well. The whole set is pleasingly heavy to pick up! I did not realise how used to poor quality tools I had become accustomed to over the years, but as soon as you handle these, you can feel that quality. Everything feels very substantial and well-made. This set is the first Tekton product I have bought, but I am so pleased with it that I will be buying their letter and number stamps when I have the money.