No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Avance térmico Grizzly Minus Pad
almohadillas para orejas térmicas de alto rendimiento para aplicaciones versátiles
Las almohadillas para orejas térmicas Minus Pad Advanced eléctricamente no conductoras se basan en el probado Minus Pad 8 y se han optimizado para mejorar la conductividad térmica y la compresibilidad. Son adecuados para SSD, enfriadores de tarjetas gráficas, enfriadores de agua GPU y componentes electrónicos.
Muy buenas características para un rendimiento óptimo
Las almohadillas para orejas térmicas ofrecen una excelente conductividad térmica y una alta compresibilidad. Son fáciles de usar y, gracias a su no conductividad eléctrica, especialmente seguros para componentes electrónicos.
Disponible en varios tamaños y grosores
Están disponibles en tamaños de 100 × 100 mm y 120 × 20 mm, con opciones de grosor de 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm y 3,0 mm, adecuado para varios requisitos.
Mike
Comentado en los Estados Unidos el 25 de marzo de 2025
I have used all 4 variants/thicknesses of this product to re-apply/replace the thermal pads on my Gigabyte RTX 4070 card.The 4070 card uses .5mm, 1.0mm and 2.0 variants as far as I can measure. Heat dissipation has definitely increased and I am able to get 5%+ higher overclocking memory than I did with the stock thermals. The fans behavior is also more consistent which leads me to believe It is more evenly disbursing heat through the heat sink then the stock pads.It is easy to work with and does not tear or rip. It compresses great. The 2.0mm pads compress very well, with some bounce back to ensure it will seat against both chip and heat sink surfaces once you tight it down. You can press on it with your finger and watch it come back up a tad over the course of a minute or two. You can compress it at least 50% which goes for all thicknesses.I would highly recommend using these thermals for anybody who is looking to change or upgrade them on any electronic devices based on what I've seen with my RTX 4070 card. Much better then the thermal putty I've used on game consoles in the past.
Ron B
Comentado en los Estados Unidos el 2 de abril de 2025
I have a PCIe 4.0 NVMe SSD in an external USB 4.0 Enclosure that I use to transfer photos and video from my Canon R6 Mark II to my editing PC. The drive was getting hot and thermal throttling in sustained transfers. Worse still, I accidentally dropped the thermal pad when attempting to re-seat it.I use Thermal Grizzly products in my editing PC, so I decided to give these 1mm thermal pads a try for the NVMe. I am so glad I chose these--they were extremely easy to apply. Performance improved substantially over the no-name pad in the drive previously--I am no longer experiencing any thermal throttling on the enclosure. Performance is so good, in fact, that I immediately used the other 3 pads in the kit to replace the thermal pads on the NVMe SSDs in my PC. Overall, I couldn't be happier, and I think this is a great value for 4 top-of-the-line thermal pads.
Mitchell Wainwright
Comentado en los Estados Unidos el 4 de abril de 2025
Great NVME SSD thermal pad. Works great with my gen 4 NVME. Keeps temps low and is easy to install.
Some Art Guy
Comentado en los Estados Unidos el 3 de abril de 2025
I love Thermal Grizzly products for my computers. The value, given the durability of the pads, can't be beat. Functionally the best thermal pads on the market today, use them for installing or repasting a GPU or other MB work. Great packaging too.
Random Customer
Comentado en los Estados Unidos el 4 de abril de 2025
These worked great for replacing the old thermal pads that came with my motherboard. The SSD heatsink thermal pads for the motherboard were flattened and worn after a few years of use. These thermal pads were the correct size replacements.
Productos recomendados
Mex $199.36
Mex $ 115 .00 Mex $115.00
Mex $201.00
Mex $ 114 .00 Mex $114.00