No hay artículos en el carro
No hay artículos en el carroALBERTO VALENZUELA ARCE
Comentado en los Estados Unidos el 7 de agosto de 2023
Perfecto
Aarón Guadarrama
Comentado en México el 26 de diciembre de 2022
El equipo es de buena calidad y está trabajando muy bien
CNHBNGB
Comentado en los Estados Unidos el 16 de noviembre de 2022
I bought this specifically to make a pump curve for a water circulating pump, so I didn't want to spend a lot of money. It worked well for my intended application and quality seems pretty good. As the description clearly states, tube size is DN15 (a bit smaller than 1/2" pipe. Since I was not putting any pressure on this, I tapped the fittings for 1/2" NPT and screwed a pvc adapter into it. Worked fine for a benchtop application, but I wouldn't recommend putting much pressure on this arrangement. Some multi-purpose cement on the threads would probably ensure no leaks and help with pressure capability, but do so at your own risk.
KEvin
Comentado en Canadá el 22 de julio de 2020
Overall seems a decent quality product, but I made the bad assumption that this would fit imperial sized pipe (IPS standard).If you have access to DN15 fittings, great!One small gripe/observation: the union nuts are labeled "UPVC-ABS" and while I'm fairly certain they are PVC, it puts it into question. (FYI standard is UPVC as opposed to CPVC)
Patrick B.
Comentado en Canadá el 17 de mayo de 2020
I have this rotameter in line with my wellpump . I also have a pressure gage before and after my filtration setup. It really remove the guessing game to have the flow reading to decide if it is time to either clear or replace my filter cartridges.Any one living with water from a well should consider this little accessory.
Hockey
Comentado en Canadá el 29 de diciembre de 2019
Works great, easy to read, doesn't seem to reduce flow much. I had bought and installed another one with lower reading and it was easy to swap.
Productos recomendados