No hay artículos en el carro
No hay artículos en el carroMás información del producto
Acerca de TotalBoat
Desde 2012, hemos estado fabricando productos de calidad marina. Lo que comenzó como un puñado de productos de reparación duraderos para navegantes de bricolaje prácticos ha crecido para incluir una gama de soluciones expertas para fabricantes de todo tipo, desde artistas del paisaje marino hasta carpinteros interiores. Ha sido una evolución y educación. Como navegantes y bricolaje, entendemos que necesitas proyectos para ir sin problemas.
Pablo M.
Comentado en los Estados Unidos el 13 de enero de 2025
Bad quality. I really thought it would work well but I ordered 1 gallon and the largest container came solid. I tried to soften it but it was almost impossible, it was all full of lumps. I really regret having bought this!!!
jeff snider
Comentado en los Estados Unidos el 25 de junio de 2023
It says to stir before using, no way you could have done by hand with a stick. It was clayish with a liquid suspended above. This has been on the shelf way, way, way to long. I needed a drill paint mixer to mix it and even then it took (10 min ) to get the small chunks to homogenize... If I didn't need to use it today I would have returned... Be aware of this and plan accordingly.I used a 3/8" foam roller on my boats aluminum bench seats, that I removed and sanded ahead of time. The paint wanted to dry quickly and I had to work fast. I did it in full 60 degree morning sun and would suggest doing this in the shade. I will do a second coat but not the 3 coats recommended or the 5 coats using a low nap roller.
Eliza
Comentado en los Estados Unidos el 1 de agosto de 2022
Followed instructions, perfect results! Coated my pontoon boat hulls in the Spring of 2021. In the salt and brackish water since. No corrosion. I highly recommend.
JJillP
Comentado en los Estados Unidos el 11 de junio de 2022
We have a 15' stock tank pool that our kids "swim" in during the summer. I keep chlorine in it, so last year it began to rust. I tried sanding the rust down and using flex seal, and that flaked off almost immediately. So this year we, again, buffed out all the rust and used this, and it is working incredibly well so far!! It covered the bottom of the 15' pool thinly and about 6" up the pool wall. I would like to put on another coat this fall for extra protection, as the can calls for multiple coats. But this was a great solution to our problem!!
Rowdy Rowtons
Comentado en los Estados Unidos el 6 de agosto de 2020
I only put it on the bottom 8” of my boats, the grey paint above it is PPG auto paint. It is thick and that’s what you want. I use a drill and mixing attachment to blend the base then add the hardener. I fish and gig flounder in shallow oyster filled bays from Galveston to Brownsville Texas. The bottom of my boats are always running on oyster reefs!If someone says it came off they didn’t acid etch and use conditioner on the bare aluminum.Some May say it’s hard to apply because it’s so thick. Once you get it mixed right it’s is easy to roll on. I would not try to spray it but you may be able to if you get the can hot in the south Texas sun and use an airless. The stuff does what it is supposed to and filled small pin holes from salt water corrosion. I did all three of my Jon boats with it... fishing, floundering and duck boats!
Productos recomendados
Mex $400.04
Mex $ 196 .00 Mex $196.00