No hay artículos en el carro
No hay artículos en el carroMameluco para bebé de 3 a 6 meses para niña de invierno para bebé de primer día de San Valentín para niña de San Valentín para niña recién nacida, trajes de invierno, falda de invierno para niñas, chamarra y traje de nieve, regalos de San Valentín para niñas pequeñas, pantalones de San Valentín, camisa roja de San Valentín para bebé niña 0-3 chamarra para bebé niña niño de San Valentín de 24 meses, sudadera de San Valentín para niña , Conjunto de faldas de San Valentín para niñas pequeñas, regalo de San Valentín para niña pequeña, regalos de San Valentín para bebés, mameluco de San Valentín, ropa de invierno para niñas, ropa de bebé recién nacido, trajes de niña recién nacida, trajes de 3 a 6 meses, San Valentín, traje de San Valentín, camisas de San Valentín, camisetas de San Valentín para niñas, niñas pequeñas, papá es mi primer día, traje de recién nacido, 3T, camisa de manga larga, regalo de San Valentín, talla 8, tallas grandes. San Traje de bebé niño bebé traje de nieve 0-3 meses traje de San Valentín niñas tamaño 7 día de San Valentín traje de recién nacido niña traje de día de San Valentín talla 7/8 vestido de San Valentín niña bebé niña traje de San Valentín 0 3 meses traje de San Valentín para bebé niña primer día de San Valentín ropa niño traje de San Valentín camisa bebé niña regalos mi San Valentín bebé niña traje de San Valentín lindo 0-3 meses bebé Mameluco para el día de San Valentín, trajes para mamá y mí, regalos para niñas recién nacidas, regalos para niñas, día de San Valentín, camisa de invierno, ropa para niña, ropa para niña, camisas de manga larga, paquete de 3 piezas, trajes para bebés de 0 a 3 meses, traje para el día de San Valentín para niña de 24 meses
Ivan
Comentado en México el 8 de noviembre de 2024
Es lo que esperaba funciona adecuadamente para la aplicación que lo necesito
Mr. Andy
Comentado en Canadá el 14 de septiembre de 2024
Been using for quite some time now, still works. simple. I removed it from the housing, and installed in a plastic electric enclosure for a cleaner look
D_coop87
Comentado en Canadá el 20 de abril de 2023
Says it’s good for 60A, but it’s not. I installed this on an upgraded 24V power wheels for my son to give him infinite speed control rather than just high and low. I’ve got the wiring protected by a 40A thermally resetting breaker. After about 10-15 mins of use, truck would go slow, as if batteries are dying. Let it cool down for an hour and it would be good again. We only got one weekend of use of it before it died completely. Don’t waste your money on it. I’m sure if your intentions were 20A of intermittent use, it would be ok. This one has no fan and I don’t see any decent sized relays to handle the load. Oh and the labels are in Chinese or some weird symbols, so i had to come back on here to figure out which terminals are for the motor and battery. They say + and - but don’t tell you which is motor or battery. Not a huge deal, but a simple B and M would suffice.I’ve since bought another one good for 100A apparently. It has a built in fan and the relays are quite large to hopefully handle the draw 🤞
Martin
Comentado en Canadá el 28 de agosto de 2022
Works as it should. However, the LED lights are a bit fragile and easy to break if you are trying to mount them in a box. Pot and ON/OFF switch are a bit flimsy as well but to be expected considering the price. Other than that it seems to work fine. Time will tell how long it lasts as I am running my 24V trolling motor on it.So after using it for 3 months I am happy with the controller. But one piece of advice I recommend is to remove the board from the casing. The reason why is that the clearance between the circuit board and metal bottom is tiny and could result in a short circuit if it is moved around or bumped which will damage the controller. Also I would add additional cooling via a fan to remove excess heat. I noticed it got very hot if you pump more than 25A through it. This is probably the reason why many are seeing failures with it. It will definitely not handle 40A continuous as it should be rated for without additional cooling. With these mods it should work without any problems.
P Koomen
Comentado en Canadá el 1 de agosto de 2021
I used one to the welding position-er, I made it run old windshield wiper motor which is 12 v . And with the speed controller on it it works very well.And I aLso used it to control and old drill ( 18V ) I have and can't Get to the USA to buy new batteries at HF so I used it to power run, my milling machine table. with the speed control and the forward and reverse it works like a dream.
Bernard van Honschoten
Comentado en Canadá el 23 de diciembre de 2021
This PWM is working perfectly with my trolling motor showing procentuele data of the speed FRW and REVWhich I find is important to know. The power is provided with a deep cycle 12 volt 100Ah battery.Bernard
Productos recomendados
Mex $753.31
Mex $ 346 .00 Mex $346.00
Mex $753.31
Mex $ 361 .00 Mex $361.00
Mex $541.70
Mex $ 287 .00 Mex $287.00
Mex $646.77
Mex $ 291 .00 Mex $291.00
Mex $1,106.00
Mex $ 608 .00 Mex $608.00
Mex $643.36
Mex $ 328 .00 Mex $328.00
Mex $529.07
Mex $ 238 .00 Mex $238.00